Stirrer Assembly

The stirrer assembly consists of a blade, pin, and cover. The blade is air driven and rotates on a shaft embedded in the stirrer cover. The stirrer assembly is located at the top of the oven cavity.

To remove the stirrer:

1.Disconnect power from the microwave oven and open the door.

2.Remove the plastic clip from the stirrer cover.

3.Rotate the stirrer cover to the left and remove the stirrer cover.

Noise Filter

The noise filter helps to suppress electromagnetic interference (EMI) radiating from the operation of the oven and also protects the oven from any line noise. The noise filter is located on the right side of the oven behind the control panel. The noise filter is held in place by three compression pins.

Note: When installing the noise filter, ensure all filter wiring is connected to the correct terminals.

PinPin

Noise Filter

Pin

Check to make sure the fuse is not open. Check the noise filter for approximate resistance value at the following locations:

White (neutral input) to white (neutral output) - 0 Ω.

Black (line input) to black (line output) - 0 Ω.

White (neutral input) to black (line input) - 23 Ω.

Line Fuse

Note: When the 20-amp fuse is blown due to operation of the monitor switch, the monitor switch must be replaced. Also replace the relays and/or the interlock switches when the continuity check shows the contacts are shorted.

The unit is equipped with a 20-amp fuse (part number WB27X10928).

The fuse is located on a receptacle near the top of the noise filter and is common to all functions and door switches.

To remove the fuse:

1.Disconnect power to the microwave oven.

2.Remove the control panel assembly. (See Control Panel Assembly.)

3.Remove the fuse.

Fuse

L1 & N Out

L1 & N In

– 20 –

Page 20
Image 20
GE JVM1750 manual Stirrer Assembly, Noise Filter, Line Fuse, To remove the fuse, To remove the stirrer

JVM1750 specifications

The GE LVM1750, EVM1750, HVM1750, and JVM1750 are advanced energy management solutions designed to optimize the performance and reliability of industrial and commercial electrical systems. These products by General Electric (GE) are integral to modern power distribution networks, providing unprecedented efficiency and control.

The GE LVM1750 is a versatile low voltage motor control center that emphasizes compact design and high performance. One of its main features is the ability to accommodate a wide variety of motor and control configurations, making it suitable for diverse applications. It incorporates state-of-the-art technology to ensure quick troubleshooting and reduces downtime through its integrated diagnostic tools.

On the other hand, the EVM1750 is engineered for enhanced energy efficiency. This variant utilizes GE’s proprietary EcoStruxure technology, which facilitates real-time monitoring and control of energy consumption. The EVM1750 features advanced algorithms that optimize energy usage while maintaining operational integrity. This optimizes electricity demands during peak times, which can significantly reduce operational costs.

The HVM1750 is noteworthy for its robust construction and ability to handle high-voltage applications. Its main characteristics include superior thermal performance and advanced safety features designed to mitigate risks in high-demand environments. The HVM1750 is ideal for large industrial operations requiring reliable and efficient power management solutions.

Last but not least, the JVM1750 is tailored for renewable energy integrations. It provides crucial capabilities for managing distributed energy resources (DERs) and optimizing energy flows from renewable sources. The JVM1750 is equipped with smart grid capabilities, allowing seamless integration with other energy management systems. Its adaptability makes it an essential component in today’s shift toward sustainable energy practices.

All four models share characteristics such as scalability, reliability, and ease of maintenance. They are designed with user-friendly interfaces that simplify the monitoring and control processes. Furthermore, their modular designs allow for flexible configurations tailored to specific operational needs.

In summary, the GE LVM1750, EVM1750, HVM1750, and JVM1750 are leading-edge solutions that cater to the evolving demands of modern power distribution, emphasizing energy efficiency, safety, and adaptability. Through these innovations, GE continues to play a pivotal role in advancing electrical management technologies across industries.