OCX 8800
Instruction Manual
IM-106-880, Rev 1.0 January 2007
6.See Figure 7-7. Using straightedge on the sensor holder flat, as shown, matchmark upper flange of sensor housing to show correct alignment of sensor holder.
7.With one wrench holding eductor elbow (12, Figure 7-6), and one wrench on flats of sensor holder (11), unthread and remove COe sensor assembly (5). Do not allow eductor elbow to turn.
8.Slide band heater (10) and heater insulator (9) from sensor holder (11).
Figure 7-7. Alignment of
COe Sensor Assembly
Matchmark
Straightedge
Sensor
Holder
Flat
Matchmark
37390035
