Emerson OCX 8800 instruction manual Ocx

Instruction Manual

IM-106-880, Rev 1.0 January 2007

OCX 8800

5.Figure B-6 shows the SPA menu, submenus, and parameter values that must be selected to configure the SPA for use with the OCX 8800. Use the following instructions and selections shown to properly configure the SPA.

a.Press the SELECT pushbutton. Observe the display window on the SPA front panel. The display window should read SET HART.

b.See the SET HART command in Figure B-6. To the right of the command window is the SET HART submenu and related parameter values that must be selected via the front panel pushbuttons on the SPA.

c.In the submenu views shown:

means press the down pushbutton. means press the up pushbutton.

means press the SELECT pushbutton one time.

means press the or pushbutton until the desired parameter value is shown in the SPA window.

d.Proceed through the SPA menu, selecting the menu commands and parameter values indicated. After completing the sequence in the first column, go to the top of the second column and continue.

e.To exit the menu, repeatedly press SELECT to display any main

menu command. Then, press or until CONF EXIT is displayed. Select CONF EXIT.

f.Detailed instructions concerning the configuration menu and the submenu structure for each main command are provided in the SPA user's manual.

B-5