Safety Information
Operating Instructions
Troubleshooting Tips
Consumer Support
Replacing the light bulbs.
Cooktop Light/Night Light
Replace the
Remove | 1 | To replace the bulb(s), first disconnect the |
screws | power at the main fuse or circuit breaker panel | |
| ||
|
| or pull the plug. |
|
| Remove the screw at the outside edge of the |
| 2 light cover and push on the inside edge of the | |
|
| cover to open. |
| 3 | Be sure the bulb(s) to be replaced are cool |
| before removing. After breaking the adhesive | |
|
| seal, remove the bulb by gently turning. |
|
| Replace the screw. Connect electrical power |
| 4 to the oven. | |
Screws | Oven Light | |
| Replace the | |
| incandescent bulb (WB36X10003), available from | |
| your GE supplier. | |
| 1 | To replace the oven light, first disconnect the |
| power at the main fuse or circuit breaker panel | |
|
| or pull the plug. |
|
| Remove the top grille by taking out the 2 screws |
| 2 that hold it in place and sliding the grille to the | |
|
| left (opening the door makes grille removal |
|
| easier). |
| 3 | Next, remove the screw located above the door |
| near the center of the oven that secures the |
light housing.
4 Replace the grille and screws. Connect electrical power to the oven.
36