Time
TheTIME COOKfeatureallows you
topresetthe cooking time.The
ovenshutsoff automatically,
PowerLevel10is automaticallyset
fortime cooking, butyou may
changethisfor more flexibility.See
yourCookbook.
Tobecomebetteracquaintedwith
TIMECOOKfunction, makeacup
ofcoffee byfollowing the steps
below.
Step1: Fill acup 2/3 full of water
andadd 1 teaspoon of freezedried
coffee.Use acupthat has no metal
decoration, Placecup in oven and
closedoor.
Step 2: ‘?’OUdlTIME COOKt The
display shows :0. Signal light
aboveTIME CJ30K flashes.Power
Level ‘fO Is automatically set in
oven, but does not appear In
display.
Step 3: Select your time. Touch
1,2-andOfor aminute and 20 sec-
onds. 1:20and signal light above
TIME COOK appear on display. If
another Power Level is desired
touch POWER LEVEL and the
number, although Power Level 10
(HIGH) is preferred for this cup of
coffee.
Step 4: Touch START. Time
counting down showson display.
Step S: When ?!ms is up, oven
sounds and oven, light, and fan
shut off.

iiwtcl

Q. fsetmy oven for the time called
for in the recipe but at the end of
the time allowed, my dish wasn’t
done,What happened?
A. Since house power varies due
to timo or location, many Time
Cookr9ciPe$f2JiVf3YOU athe I’W7fj0
to prevent overcooking. Set the
oven for minimum time, test the
food for doneness,and cook your
dishalittle longer, if nece$sary.
Q. Iwant to cook my dish on a
PowerLevelother than HIGH, what
do Ineedto do?
A. To change the Power Level,
touch thePOWERLEVELpad after
ente?ing desired cooking time.
Enterthe desired number and then
touch START.
Q. Can 1interrupt my Time Cook
function tocheck the food?
A. Yes,To resumeGooking,simply
dose the door and touch START,
NOTE: Microwave power will not
come on until you are ready. You
must touch STARTfor cooking to
begin.
Q. Itouched the numberpads and
selected my power level, When I
touched START,however,myoven
didn’t comeon. Why not?
A. The TIME COOK pad must be
touched beforesetting the number
pads or elseyour oven will not be-
gincooking,
G).Itried to change Power Level
but the display changed back to
cooking time.Why?
A. After touching PowerLevel pad
you only have4seconds to enter
the number. Try setting controls
again.
10
———