GE LVM1540 owner manual Light Bulb Replacement, Cooktop Light, Oven Light

Light Bulb Replacement

Cooktop Light

Replace the burned-out bulb with a 120 volt,

40-watt incandescent bulb (WB36X10003), available from your GE supplier.

1To replace the bulb(s), first disconnect the power at the main fuse or circuit breaker panel or pull the plug.

2Remove the screw at the front of the light cover and lower the cover.

Remove screw

3Be sure the bulb(s) to be replaced are cool before removing. After breaking the adhesive seal, remove the bulb by gently turning. Replace with the same size and type bulb.

4Raise the light shield and replace the screw. Connect electrical power to the oven.

Oven Light

Replace the burned-out bulb with a 120 volt,

40-watt incandescent bulb (WB36X10003), available from your GE supplier.

1To replace the oven light, first disconnect the power at the main fuse or circuit breaker panel or pull the plug.

2Remove the top grille by taking out the 2 screws that hold it in place.

Screws

3Remove the charcoal filter (if present) to access the light cover (see Remove Charcoal Filter section).

4Remove the light cover located near the center of the oven that holds the bulb. After breaking the adhesive seal, remove the bulb by gently turning. Replace with the same size and type bulb.

Light cover

5Replace the light cover and charcoal filter

(if present).

6Replace the grille and screws. Connect electrical power to the oven.

33