gGE Security
ADDING AND CHANGING USER CODES
Your system must be Disarmed to add/change user codes.
Step 1 | Press |
Step 2 | Enter a “Master Arm/Disarm Code”. |
| NOTE: For partitioned systems, someone changing the code of another person must |
| have access to all or more partitions than the user being changed. |
Step 3 | The ready light will flash. |
Step 4 | Enter the 2 digit (applies to NX4/6/8) or 3 digit (applies to NX8E) “user number” (always enter |
| 2 digit such as [0] - [3] for user 3, or [1] - [0] - [0] for user 100). |
Step 5 | Enter the new four (4) or six (6) digit “user code”. |
| NOTE: To delete a user code, enter |
| for a |
Step 6 | The ready light will flash indicating you are back at Step 4 above. If the code is rejected, the |
| sounder will beep 3 times. |
Step 7 | If another “user code” needs to be programmed, return to Step 5. |
Step 8 | Press the [#] key while the ready light is flashing to exit the User Code Programming Mode. |
Page 11 | 04/10/04 |
