GE NX-108/116/124E user manual Keypad Control Tones Beeps, Setting the system date, gGE Security

gGE Security

Setting the system date

Step 1	Enter [r] [9][6].
Step 2	Enter [master code].
Step 3	Enter the “Day of Week “		3 = Tuesday		5 = Thursday 7 = Saturday
	1 = Sunday
	2 = Monday		4 = Wednesday		6 = Friday
Step 4	Enter the “Month Code”. Must always be two (2) digits.
	01	= January	05	= May	09	= September
	02	= February 06		= June	10	= October
	03	= March	07	= July	11	= November
	04	= April	08	= August	12	= December
Step 5	Enter the “Day Code”. Must always be two (2) digits.
	Example: The 5th would be entered as [0] – [5].
Step 6	Enter the last two digits of the “Year Code”.
	Example: For 2003 enter [0] – [3].

KEYPAD CONTROL TONES (BEEPS)

A sounder is built into the keypad. If programmed, your system keypad may sound for any of the following reasons:

•Beeps for all keypresses.

•Sounds a continuous tone during the Entry delay time.

•Pulses when a day zone is violated while the system is disarmed.

•Pulses when a FIRE zone has a trouble condition.

•Beeps 3 times for trying to arm with the “Ready” light off, if “Force Arming” has not been selected.

•Beeps for 1 second or emits a “ding-dong” sound for the “Chime” feature.

•Beeps during an exit delay; beeps rapidly for the last 10 seconds of an exit delay; and beeps 1 second at the end of the exit delay.

•Pulses when the armed status changes and the AC power is off.

•Pulses when the armed status changes and any zone(s) are bypassed.

•Pulses when the armed status changes and a low battery is detected.

•Pulses when the armed status changes and a Tamper condition is detected.

•Beeps to indicate Telephone Line Cut, if selected.

•Pulses when one or more of the following conditions are detected: Zone or Box Tamper, Low Battery, AC Power Fail, or Expander trouble.

•Beeps 3 times every minute indicating a low battery or missing transmitter is detected (if wireless device is in system). Entering code will suppress the sounder for 12 hours.

Entering a valid code will silence the keypad sounder when it is pulsing. The arm/disarm state of your system will not change when entering a code to silence a pulsing keypad sounder. Please contact your installer if a trouble condition exists.

NX-108/116/124E User manual Page 15 04/10/04