Installation Instructions
B OUTSIDE BACK EXHAUST (Horizontal Duct) | |
INSTALLATION OVERVIEW | |
B1. | Prepare Rear Wall |
B2. | Attach Mounting Plate to Wall |
B3. | Prepare Top Cabinet |
B4. | Adjust Blower |
B5. | Mount the Microwave Oven |
B1. PREPARING THE REAR WALL FOR OUTSIDE BACK EXHAUST
This microwave oven is shipped assembled for top exhaust. You will need the exhaust adaptor for installation in the rear wall opening. To remove the exhaust adaptor from the microwave oven:
F
G
H
I
5
6
Remove tape securing damper.
7
Remove and |
|
save screw | Damper |
that holds |
|
blower plate |
|
to microwave. |
|
Lift off the blower plate and attached adaptor from the microwave.
1Place the mounting plate against the rear wall and align it with the holes drilled earlier.
2Using a pencil, put dots through holes/notches F, G, H and I (see above illustration). Remove the mounting plate and draw lines extending through the points. This will give the location and size of the box cutout for the rear wall duct.
3Use a saw (saber or keyhole) to cut out the opening.
4Place the microwave in its upright position with the top of the unit facing up.
15
Back of
Microwave
8Slide exhaust adaptor to one side and remove it.