GE RGA620 To Make Electrical Connection on electric ignition models, Operating Instructions

Models: RGA624 RGA620

1 36
Download 36 pages 46.72 Kb
Page 28
Image 28

Safety Instructions

Installation of the range.

Read these instructions completely and carefully.

To Make Electrical Connection (on electric ignition models)

Operating Instructions

CAUTION—FOR PERSONAL SAFETY: DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.

This appliance must be supplied with the proper voltage and frequency, and connected to an individual, properly grounded and polarized branch circuit, protected by a circuit breaker or time-delay fuse, as noted on the rating plate. (Refer to the rating plate under the cooktop for this information. See the Lift-Up Cooktop section in this manual for instructions on how to lift the cooktop.)

Wiring must conform to National Electrical Codes or the prevailing local code for a range of this kilowatt rating. (Refer to the rating plate under the cooktop for this information. See the Lift-Up Cooktop section in this manual for instructions on how to lift the cooktop.)

If the electric supply provided does not meet the above specifications, call a licensed electrician.

Installation Instructions Care and Cleaning

WARNING!

Electrical Grounding Instructions

This appliance is equipped with a three prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. Do not cut or remove the grounding prong from this plug.

INSURE PROPER GROUND EXISTS BEFORE USE.

Light and Adjust Surface Burner Pilots (on standing pilot models)

Troubleshooting Tips

Be sure surface burner control knobs are in the OFF position.

Lift the cooktop up and prop it open with the prop rod provided (see the Care and cleaning of the range section).

Locate the 2 pilot ports and light each of them with a match.

Pilot port

If the pilots need adjusting, use a small flat-bladed screwdriver to turn the adjusting screw (accessed through a hole in the front right side of the burner box).

Pilot adjustment

Consumer Support

Top pilots adjustment screw controls the rate of gas to the top burner pilots.

Observe lit burners. Compare the flames to pictures in the Before you call for service section. If any flame is unsatisfactory, call for service.

28

 

To avoid pilot outage, slowly lower the

 

 

cooktop after lighting the pilots.

 

Page 28
Image 28
GE RGA620, RGA624 owner manual To Make Electrical Connection on electric ignition models, Electrical Grounding Instructions

RGA624, RGA620 specifications

The General Electric (GE) RGA620 and RGA624 are advanced radiation survey meters designed for professionals in nuclear facilities, environmental monitoring, and emergency response. These devices offer robust performance and innovative features that enhance user experience and ensure precise radiation detection.

At the core of the RGA620 and RGA624 are highly sensitive Geiger-Müller (GM) tubes, which allow for the detection of alpha, beta, and gamma radiation. This versatility makes them suitable for a wide range of applications, from laboratory research to field measurements in emergency situations. Both models feature a broad energy response, enabling accurate detection across varying radiation energies.

One of the standout features of the RGA620 and RGA624 is their digital display, which provides clear and easily readable results. The intuitive interface allows users to quickly access measurement functions, change settings, and view real-time data. Alongside this, the devices are equipped with audible alarms, providing instant alerts when radiation levels exceed predefined thresholds, ensuring timely response during critical situations.

Both models utilize advanced data logging capabilities, enabling users to store measurement data for future analysis or compliance reporting. This feature is particularly valuable in regulatory environments where documentation of radiation levels is crucial. The RGA620 and RGA624 can also connect to external software for further data management, enhancing operational efficiency.

In terms of durability, the RGA620 and RGA624 are designed with rugged housing that meets stringent industrial standards. Their lightweight and portable design make them suitable for fieldwork, allowing professionals to conduct radiation surveys effortlessly. The devices are also designed for easy maintenance, with replaceable batteries and straightforward calibration processes.

Enhanced connectivity options, including USB ports, allow for easy data transfer and integration with other monitoring systems. This adaptability ensures that the RGA620 and RGA624 can be an integral part of a comprehensive radiation safety program.

Overall, the GE RGA620 and RGA624 are exemplary tools in radiation detection technology. Their combination of sensitivity, user-friendly features, and robust design make them essential for professionals working in environments where radiation monitoring is paramount. With these instruments, users can ensure safety, compliance, and effective management of radiation risks.