GEAppliances.com
| Lower Rack |
| The lower rack is best used for plates, saucers and |
| cookware items. Large items, such as broiler pans |
| and baking racks should go along the sides of the |
| rack. If necessary, oversized glasses and mugs can |
| be placed in the lower rack to maximize loading |
| flexibility. Plates, saucers and similar items should be |
| placed between the tines in the direction that allows |
| the item to remain secure in the rack. |
| Do not load large items where they may block the |
| detergent dispenser when the door is closed. |
| The reversible tine blocks (on some models) are |
Clip | designed to allow greater flexibility in loading dishes. |
The direction of the tine blocks can be changed to | |
| match preferred loading direction. To adjust the tine |
| block direction, remove the clips securing the tine |
| blocks to the racks by pulling up on the tab, then |
| flex the retaining wire to unseat the tine block from |
| the lower rack. The tine block may be turned in the |
| opposite direction to reverse the loading direction. |
| Secure the tine block to the rack using the same |
| process and be sure to snap the same clips in place. |
| WARNING! The clips can be a |
| choke hazard for small children. Keep out of |
| reach of children. |
Fold down tines (on some models) allow for greater flexibility in loading large items. Select the position of the fold down tine that best accommodates your dishware items. The direction of the fold down tines can be changed to match preferred loading direction. To adjust the fold down tine direction, remove the clips securing the fold down tines to the racks by sliding the clip so that it disengages from the rack wire. The fold down tines may be rotated in the opposite direction to reverse the loading direction. Secure the fold down tines to the rack using the same clips. The clip is removed by pulling up on the clip and separating it from the rack. Replace the clip on the opposite side of the rack by positioning the clip over the wire and pressing down.
It is important to ensure that items do not protrude through the bottom of the rack or the silverware basket where they will block the rotation of the lower spray arm. This could result in noise during operation and/or poor wash performance.
Lower Rack - 8 Place Settings - | Lower Rack - 10 Place Settings - | Lower Rack - 12 Place Settings - |
GDF510, GDF520 & ADT521 | GDF510, GDF520 & ADT521 | GDF510, GDF520 & ADT521 |
Lower Rack - 8 Place Settings - | Lower Rack - 10 Place Settings - | Lower Rack - 12 Place Settings - |
GDT530, GDF540 & GDT550 | GDT530, GDF540 & GDT550 | GDT530, GDF540 & GDT550 |
9
