Setting Up the VCR
Startup
7.Select the language/Escoge una lengua.
This feature lets you select English or Spanish as the language for your
A. Press MENU•PROG on remote to see VCR MAIN MENU on the
TV screen.
B. Press 5 to display the LANGUAGE menu.
¥Press 1 to display the menus in English.
¥Press 2 to to display the menus in Spanish.
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
4Preferences
5 Language
LANGUAGE/IDIOMA
Select a language. Escoge una lengua.
1 English (Inglés)
2 Spanish (Español)
Press MENU to continue
8.Place channels in the VCR’s memory.
Channels 2 through 13 including line inputs (L1 and L2) are in the VCRÕs memory when you first turn it on. The VCR stops on these channels when you press CHANNEL up or down. To get additional channels available on your antenna or cable system, you must use the Auto Channel Search feature of the VCR. If you ever change cable or antenna signals, you may need to auto channel search again. See Cable Box Setup on page 28.
A. Press VCR1 to set remote to control VCR.
B. Press MENU•PROG on the remote to see the VCR MAIN MENU on the TV screen.
If the menu does not appear on the TV screen:
¥Press VCR1 and then press MENU•PROG.
¥If you have used one of the basic hookups, make sure the TV is tuned to the same channel (3 or 4) as the Output Channel selected in the PREFERENCES menu.
Check VCR indicator in display panel Ñ it should be on. Press TV•VCR to turn it on.
¥If you have connected your VCR using one of the advanced hookups, tune your TV to its video input (refer to TV OwnerÕs manual).
¥Check the connections.
C. Press 3 to select CHANNELS.
D. Press 1 to begin Auto Channel Search.
Wait until the channel numbers stop changing. The TV will then tune to the lowest channel found. Press CHANNEL up or down to select the active channels.
The VCR automatically selects ANTENNA or CABLE for the Signal Type feature in the CHANNELS menu. If you need to change the setting manually, press 3.
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 Cable Box Setup
0 Exit
9
