Controls and Features
Icemaker
Remove packaging
IMPORTANT: Do not remove any permanent instruction labels inside your icemaker or the Tech Sheet that is fastened behind the lower access panel.
•Remove tape and any labels from your icemaker before using (except the model and serial number label).
To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.
•Do not use sharp instruments, rubbing alcohol, flammable fluids or abrasive cleaners to remove tape or glue. These products can damage the surface of your icemaker. For more information, see Important Safety Instructions.
Clean before using
After you remove all of the packaging materials, | See the cleaning instructions in Care and |
clean the inside of your icemaker before using it. | Cleaning. |
Set controls
1.To start the normal ice making cycle, select ON.
2.To stop icemaker operation, press and hold OFF.
NOTE: The CLEAN setting is used whenever solutions are circulated through the icemaker for cleaning. See Care and Cleaning.
8
