Handling and care of CD´s
•Only hold CD´s on their edges to protect the surface from finger prints. Finger prints, dirt and scratches can cause skipping and distortion.
•Do not write on the printed CD side using a ball pen or any other pen.
•Do not use benzene, thinner or liquids against electrostatic charge.
•Do not drop or bend CD´s.
•Only insert one CD into the CD drive.
•Do not close the CD drive when the CD is not correctly inserted.
Cleaning CD´s
•Clean CD´s with a soft cloth.
•Clean CD´s from center to edges.
Storage
Store CD´s in their cover after playback.
Handling of audio cassette tapes
1.Loose tape bands can cause problems. Use a pencil to carefully tighten the tape band (see fig. 1).
2.To avoid unintentional deleting of a tape, please quarry out the recording interlock (see fig. 2). If you want to record the tape later on, put adhesive tape on the gap (see fig. 3).
Side A
(Fig.2)
(Fig.1)
Recording interlock B Side B Recording interlock A
(Fig.3)
Adhesive tape
TIGHTEN THE TAPE BAND WITH A PENCIL
3.Storing cassette tapes:
Do not store cassette tapes in direct sunlight or near radiating devices. Keep cassette tapes away from magnets.
4.
5.Infinite cassette tapes:
Please do not use infinite cassette tapes; these can damage the unit.
6.Cleaning the sound head:
Q-TIP
DRIVE
MECHANISM
PIN ROLLER
SOUND TRACK HEAD
Always keep the sound head, drive mechanism and pin rollers clean to guarantee best operation of the unit.
Clean those components as follows:
1.Open the cassette deck.
2.Immerse a
24.
