14.CLEANING – Disconnect from mains power supply before cleaning. Do not use liquid or spray cleaners, only use a damp cloth. Follow the care and maintenance instructions in this manual.

15.LIGHTNING – During lightning and longer periods of non-use please disconnect from mains power supply and antenna.

16.SAFETY CHECK – After servicing the unit ask the customer service for a safety check.

17.OVERLOAD – To avoid fire and electric shock do not overload wall outlets and convenience receptacles.

18.ELECTROSTATIC DISCHARGE – Disconnect from mains power supply and remove batteries if unit malfunctions. Reconnect after a short time.

CAUTION

THIS CD PLAYER IS A CLASS 1 LASER PRODUCT. HOWEVER, THIS CD PLAYER USES A VISIBLE/INVISIBLE LASER BEAM, WHICH COULD CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE THE CD PLAYER CORRECTLY AS INSTRUCTED.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

TO PREVENT FIRE, ELECTRIC SHOCK AND INTERFERENCE, USE ONLY RECOMMENDED ACCESSORIES AND DO NOT EXPOSE TO RAIN OR HUMIDITY.

SETTING A SAFE VOLUME LEVEL

If you continually listen to loud music, your hearing gradually adapts to it and gives you the impression that the volume is lower.

What seems normal to you can actually be damaging.

To protect yourself from this, set the volume to a low level.

Increase the volume slowly, until you can hear clearly and without problems.

Damage to your hearing can be extensive and cannot be reversed.

If you notice a hearing problem, please consult a doctor.

FURTHER INFORMATION

Setting up location of the device

Avoid vibrations, impact or tilted surfaces as the internal parts may be seriously damaged.

Do not place heavy objects on the player.

Never place the Player on amplifiers or other devices, which can become hot.

Avoid magnetic objects

• Keep magnetic objects such as speakers, at a distance from the player.

Condensation:

Condensation can occur when moving the unit from a cold to a warm environment. In such a case correct operation might not be possible.

Do not turn on and do not use the unit until it is dry.

Moving of the DVD player

Before moving remove the CD from the player.

It is suggested to remove the CD and to turn off the player for non-use periods.

Saving energy

It is recommended if the player is not used, to turn the function switch to the “OFF” position. If the player is not used for a long period of time, the player should be unplugged from the AC socket.

CAUTION: Do not touch the laser lens.

16.

Page 16
Image 16
Elta 2322USB manual Setting a Safe Volume Level, Further Information