Manuals / Brands / Kitchen Appliance / Oven / GE / Kitchen Appliance / Oven

GE JT930, JT980, ZET3038, ZET3058 THREE-CONDUCTOR BRANCH CIRCUIT CONNECTION, 8

1 16

Installation Instructions

THREE-CONDUCTOR BRANCHCIRCUIT CONNECTION

When connecting to a three-conductor branch

circuit, if local codes permit:

Connect the bare oven ground conductor

with the crimped neutral (white) lead to

the branch circuit neutral (white or gray

in color), using a wire nut.

Connect the oven red lead to the branch

circuit red lead in accordance with local

codes, using a wire nut.

Connect the oven black lead to the

branch circuit black lead in accordance

with local codes, using a wire nut. If the

residence red, black or white leads are

aluminum conductors, see WARNING

under ATTENTION INSTALLER.

Install Junction Box Cover.

Ground and

Neutral Wires

Junction Box Cover

Contents

Main Installation 30 Built-In T rivection Instructions Wall Oven JT930, JT980, ZET3038, ZET3058 PREPARE TO INSTALL THE OVEN TOOLS YOU WILL NEED MATERIALS YOU MAY NEED PARTS INCLUDED PRE-INSTALLATION E F G A SINGLE BUILT-IN OVEN CUTOUT OPTIONS CUTOUT OPTIONS FOR SINGLE BUILT-IN OVENS 2 Page UNDER COUNTERSINGLE BUILT-IN OVEN OPTION D Must Support 225 lbs. NOTE: This oven is not approved to be installed under a cooktop. SINGLE BUILT -IN OVEN CUTOUT OPTIONS DOUBLE BUILT-IN OVEN CUTOUT CUTOUT FOR DOUBLE BUILT-IN OVEN 3CUTOUT FOR DOUBLE BUILT-IN OVEN 3 REMOVE THE LOWER OVEN DOOR ON DOUBLE WALL OVEN MODELS ONLY ELECTRICAL CONNECTIONS ELECTRICAL REQUIREMENTS ATTENTION INSTALLER WARNING: ELECTRICAL CONNECTIONS CONNECT CONDUIT 6 NEW CONSTRUCTION AND FOUR-CONDUCTOR BRANCH CIRCUIT CONNECTION 5 THREE-CONDUCTOR BRANCH CIRCUIT CONNECTION 8 SECURE THE OVEN IN THE OPENING SLIDE THE OVEN INTO THE OPENING 9DRILL THE PILOT HOLES AND MOUNT THE OVEN WARNING: 10 CAUTION: 12 REPLACE THE LOWER OVEN DOOR ON DOUBLE WALL OVEN MODELS ON DOUBLE WALL OVEN MODELS, REPLACE THE LOWER DOOR: 13 FINAL CHECKLISTS PRE-TEST CHECKLIST 15 14 OPERATION CHECKLIST NOTE TO ELECTRICIAN: