Questions? Use this problem solver!
|
| The Problem Solver | ||
|
|
|
| |
|
| Stainless Steel Outdoor Cooking Center | ||
|
|
|
|
|
| PROBLEM | POSSIBLE CAUSE | ||
|
|
|
|
|
| GRILL WON’T LIGHT | •Check to see if other burners on the unit operate. | ||
| WHEN THE ROTARY | •Remove the grill rack and the stainless steel radiant tray, and watch | ||
| IGNITER IS TURNED | the igniter tip. You should see a spark jump from the tip of the igniter | ||
|
| |||
|
| when the knob is turned. If there is no spark check to ensure there is | ||
|
| gas supplied to the unit. | ||
|
| •Use a match to light the burner. (See the “To light the grill” section). | ||
|
| •Visually check the electrode and wire while turning the igniter. | ||
|
| The only place a spark should appear is at the electrode tip. | ||
|
| If the electrode or wire leaks voltage, remove and replace. | ||
|
| •Purge the gas line of any air. | ||
|
| •Check the orifice for blockage. | ||
|
| •Inspect the igniter tip to make sure it is clean and free from debris. | ||
|
| Clean the area. Readjust for 1/8″ gap. | ||
|
|
|
|
|
| BURNER FLAME IS | •Check the burner inlet for obstructions. | ||
| YELLOW OR ORANGE | •Check the air shutter for proper adjustment. | ||
| IN CONJUNCTION | (See the “Installation Instructions”). | ||
| WITH THE ODOR | |||
| •Placement of the cooking center is important for proper burner | |||
| OF GAS | |||
| operation. Do not place the cooking center in a dusty area. | |||
|
| |||
|
|
|
| |
| LOW HEAT WITH | •Inspect the fuel hose to ensure it is not bent or kinked. |
| |
| CONTROL KNOB IN | •Adequate gas supply may not be available. Check to make sure there | ||
| THE HI POSITION | |||
| is gas in the LP tank (on some models). | |||
|
| |||
|
| •If it is only one burner that appears low, the burner or burner orifice | ||
|
| may need cleaning. | ||
|
| •The air shutter may need adjustment. | ||
|
| •Preheat the grill for 15 minutes with the lid closed. | ||
|
|
|
|
|
| ROTISSERIE BURNER | •Check for a spark at the igniter. | ||
| WON’T LIGHT | •Use a match to light the burner. | ||
| (on some models) | |||
|
|
|
| |
|
|
|
|
|
| OPTIONAL | •Readjust the thermocouple so that it is not bent or kinked, but | ||
| ROTISSERIE LIGHTS | lies flat against the burner. | ||
| BUT WILL NOT HOLD | •Hold the safety valve button in until the burner remains lit. | ||
| FLAME ONCE |
|
|
|
| BUTTON IS RELEASED |
|
|
|
| (on some models) |
|
|
|
|
|
|
|
|
24
