GE Monogram ZBD5900, ZBD5700, ZBD5600 manual Problem Possible Cause What to do

Questions? Use this problem solver

PROBLEM	POSSIBLE CAUSE	WHAT TO DO
Spots and filming on	Extremely hard	•Use a rinse agent to remove spots
glasses and flatware	water	and prevent new film build-up.
	Low inlet water	•To remove stubborn spots from glassware:
	temperature	1 Remove all metal utensils from the
	Overloading the dishwasher	dishwasher.
	Improper loading	2 Do not add detergent.
	Old or damp powder	3 Select the NORMAL WASH cycle
	detergent	and HEATED DRY option.
	Rinse agent dispenser	4 Start the dishwasher and allow to run
	empty	until the main wash.
	Too little detergent	5 Open the door and pour 2 cups
		(500 ml)of white vinegar into the
		bottom of the dishwasher.
		6 Close the door and allow to complete
		the cycle. If vinegar rinse doesn’t
		work: Repeat as above, except use
		1/4 cup (60 ml) of citric acid crystals
		instead of vinegar.
Cloudiness on	Combination of soft	•This is called etching and is permanent.
glassware	water and too much	To prevent this from happening, use less
	detergent	detergent if you have soft water.
		Wash glassware in the shortest cycle that
		will get them clean.
	Extended exposure	•Lower the water heater temperature.
	to high temperature
	water
Black or gray	Aluminum utensils have	•Remove marks with a mild, abrasive
marks on dishes	rubbed against dishes	cleaner.
Dishes don’t dry	Low inlet water	•Make sure inlet water temperature is
	temperature	correct.
		•Depending on your model select BOOST &
		HEATED DRY or WATER TEMP and
		HEATED DRY options.
	Rinse agent dispenser	•Check the rinse agent dispenser.
	is empty
Dishwasher won’t run	Fuse is blown, or the	•Replace fuse or reset circuit breaker.
	circuit breaker tripped	Remove any other appliances from the
		circuit.
		•Try resetting.

21