Questions? Use this problem solver
Before You Call For Service
|
|
|
| Dishwasher |
|
|
|
|
|
| |
| PROBLEM | POSSIBLE CAUSE | WHAT TO DO |
| |
|
|
|
|
|
|
| Sanitized light does not |
| The door was opened and | • Do not interrupt the cycle any time during |
|
| illuminate at the end of |
| the cycle was interrupted | or after main wash. |
|
| the cycle |
| during or after the main |
|
|
| cycle only) |
| wash portion |
|
|
|
|
|
|
|
|
|
|
| Low inlet water | • Raise the water heater temperature to |
|
|
|
| temperature | at least 120°F (49°C). |
|
|
|
|
|
|
|
| Interior lights not |
| Door was open for more | • Latch the door and reopen. |
|
| working |
| than 15 minutes |
|
|
|
|
|
|
|
|
|
|
| Bulbs are burned out | • Call for service to replace bulbs. |
|
|
|
|
|
|
|
|
| Dishwasher has not | • Open the door and check the status |
| |
| light does not illuminate |
| completed cycle | indicator lights on control panel to |
|
|
|
|
| determine if cycle is complete. |
|
|
|
|
|
|
|
| Beeps every 30 seconds |
| Door was opened | • Close the door to complete the cycle. |
|
|
|
| during the cycle |
|
|
|
|
|
|
|
|
| START/RESET light blinks |
| START/RESET pad was | • Dishwasher will pump out for approximately |
|
|
|
| pressed during the cycle | 70 seconds and blinking light will turn off. |
|
|
|
|
|
|
|
|
|
| Power failure during | • Dishwasher will pump out for approximately |
|
|
|
| the cycle | 70 seconds and blinking light will turn off. |
|
|
|
|
| Dishwasher will automatically restart using |
|
|
|
|
| NORMAL WASH and HEATED DRY. |
|
|
|
|
|
|
|
19
