Installation Instructions
STEP 11 LEVEL DISHWASHER
IMPORTANT — Dishwasher must be level for proper dish rack operation and wash performance.
•Place level on door and rack track inside the tub as shown to check that the dishwasher is level.
Check |
| |
Level | Check | |
Front | ||
Level | ||
to Back | ||
Side | ||
| ||
| To Side |
Figure W
• Level the | Access Hole |
dishwasher by |
|
adjusting the |
|
four leveling legs |
|
individually. |
|
• If adjustment to the right rear leveling
leg is required, gain access by loosening
junction box bracket screw (through the access hole) and rotate bracket clockwise.
TIP: Pull lower rack out, about halfway. Check to be sure the rack does not roll forward or back into dishwasher. If the rack rolls in either direction, the dishwasher must be leveled again.
•If the door hits the tub, the dishwasher is not installed correctly. Adjust leveling legs to align door to tub.
STEP 12 SECURE DISHWASHER TO CABINET
The dishwasher must be secured to the countertop or the cabinet sides. When countertops are made of wood, use Method 1. When countertops are granite or other materials that will not accept screws, use Method 2 to secure dishwasher at the sides.
IMPORTANT — After leveling, verify that the dishwasher is still in the correct position shown in Step 10.
Side Mounting
Brackets
Figure Y
Countertop
Mounting
Method
•Fasten the dishwasher to the underside of the countertop with 2 Phillips screws provided.
Brackets | Wood Countertop |
Figure Z
Method
• Remove plug buttons (one on each side). |
• Install screw through the hole in the side of the |
dishwasher and into the adjacent cabinet. |
Tub
Brackets
Reinstall plug buttons. |
Frame
IMPORTANT — Drive screws straight and flush. Protruding screw heads will scratch the top or sides of the control panel and can interfere with door closing.
Plug Buttons 
Screws | Figure AA |
11
