GE Monogram ZBD6800K Advance Planning, Dishwasher Models, Prepare Dishwasher Enclosure, 6 24 Min

Installation Preparation

ADVANCE PLANNING

•These dishwashers are designed for versatility, adaptable to virtually any installation.

•All models have a full length door without the traditional access panel.

•These dishwashers may be installed beneath countertops of stone or other materials that will not accept screws. No trim kit required.

DISHWASHER MODELS

ZBD6880 SS, Stainless Steel ZBD6800 BB, Black ZBD6800 WW, White

ZBD6890 Requires a 3/4" custom panel and custom handle

PREPARE DISHWASHER ENCLOSURE

	This Wall Area
	must be Free of
34-1/2"±1/4"	Pipes or wires				24"	Cabinets
Underside of	5"	4"	5"	4"	Min.	Square
Countertop						and
to Floor						Plumb

6"

24" Min.

Floor MUST be Even with Room Floor

WARNING

To reduce the risk of electric shock, fire, or injury to persons, the installer must ensure that the dishwasher is completely enclosed at the time of installation.

ATTENTION

Pour réduire le risque de choc électrique, d’incendie ou de blessures, l’installateur doit s’assurer, au moment de l’installation, que le lave-vaisselle est complètement enclos.

34" Adjustable to 35"

* Dishwasher model
ZBD6890 requires a 3/4”	*24"
thick custom panel and will
be 24-3/4” deep	24"

•The rough cabinet opening must be at least 24" deep, 24" wide and approximately 34-1/2" high from floor to underside of the countertop.

•Plumbing and electrical service must enter the shaded area.

•The dishwasher must be installed so that drain hose is no more than 10 feet in length for proper drainage.

Figure A

CLEARANCES: When installed into a corner, allow 2" min. clearance between dishwasher and adjacent cabinet, wall or other appliances. Allow 28-3/8" min. clearance from the front of the dishwasher for door opening (Figure B).

Figure B

Countertop

Dishwasher

28-3/8"

Clearance for Door

Opening 2" Minimum

4