Secure oven
to cabinet
Installation
• When connecting to a
– Connect oven red lead to branch circuit red lead.
– Connect oven black lead to branch circuit black lead.
– Connect oven bare copper conductor and white lead to branch circuit neutral lead (white or gray).
• When connecting to a
– Connect oven red lead to branch circuit red lead.
– Connect oven black lead to branch circuit black lead.
– Break connection between oven white lead and oven bare copper conductor.
– Connect oven white lead to branch circuit neutral lead (white or gray).
– Connect oven bare copper conductor to branch circuit ground lead (green or bare copper).
Note: Aluminum house wiring requires use of special
•Position the flexible conduit on top of the oven in such a manner that it will not interfere with proper
installation.
• Slide oven into cabinet opening.
•Drill 3/32" pilot holes through mounting holes in oven front frame. (4 holes for single oven, 8 holes
for double oven.)
•The screws must be within 1/4" of the front edge of the cutout.
•Secure oven in place with screws furnished. (Use
drywall or particle board screws if cabinet is particle board).
WARNING 
Securely fasten oven to cabinet using the
screws provided. Failure to do so could
cause the oven to move or tip during use
and result in personal injury.
CAUTION Be sure you do not tip the unit forward during
installation or you may bend the Lower Side Trim.
15
