GE Monogram ZET737BW, ZET737WW, ZET757WW, ZET757BW Cabinetry, Built-InOvens, Frameless, cabinets

Frameless

Cabinetry

Built-In Ovens

cabinets

30"

Frameless

Trim Strip or Upper Cabinet Shelf

With Finished Ends like Cabinet

Sides. 1-1/8" Min. Deep for Oven

Flange Overlap and Clearance.

28-1/2" Min.

28-5/8" Max.

Fabricate Filter

Panel if Necessary. Similar to Drawer Front or Upper Cabinet Doors

or Order Additional Drawer Front.

Cabinet Depth 23-1/2" Min. From Inside Back of Front of Cabinet Frame or Side Panel. Excluding Doors

or Drawer Fronts.

5/8" Min. Thick Bottom Shelf Cut Back Flush with Front of Side Panel.

Double Ovens

51-13/16" Min.

Single Ovens

27-1/4" Min.

Finished Trim Strip 1-1/8" Min. Deep for Oven Flange Overlap and Clearance.

To Obtain Minimum Required Installation Height From Floor it may be Necessary to Install a Lower Filler Panel.

Use the information in this dimension drawing for typical frameless cabinets. The front face of the oven will be flush with cabinetry doors or drawers.

Whenever possible, order 30" frameless cabinet with the cutout sized to fit the oven. If you are using stock cabinets, additional finished filler pieces may be required to cover openings.

Rough opening for single and double ovens:

•Depth–23-1/2" min. from inside back to front of cabinet or side panel, excluding doors or drawer fronts.

–If the cabinet is not 23-1/2" deep, the back of the cabinet should be cutout. The cutout should be minimized in order to maintain structural strength and squareness of the cabinet.

•Width–28-1/2" min., 28-5/8" max.

•Height–for double oven 51-13/16" min.

•Height–for single oven 27-1/4" min.

Both single and double ovens require 11/16" overlap around edges of opening on both sides. Allow 1" for top and bottom overlap.

•Allow 1/8" clearance between top of oven and cabinet door or panel and 1/8" between bottom of oven and cabinet drawer.

•Installation of double oven requires a total height of 53-3/16" including clearances at top and bottom.

•Installation of single oven requires a total height of 28-1/2" including clearances.

7