Before you
IMPORTANT: Save these instructions for local inspector’s use.
IMPORTANT: OBSERVE ALL GOVERNING CODES AND ORDINANCES.
NOTE TO INSTALLER: Be sure to leave these instructions with the
| Consumer. |
|
| NOTE TO CONSUMER: Keep these instructions with your Use and Care | |
| Book for future reference. |
|
WARNING | This appliance must be properly grounded. See “Electrical Supply”, page 13. | |
| If you have questions concerning the installa- | Proper installation is the responsibility of the |
| tion of this product, call the GE Answer | installer. Product failure due to improper installation |
| Center® Consumer Information Service at | is not covered under the GE Appliance Warranty. See |
| 800.626.2000, 24 hours a day, 7 days a week. | the Use & Care Guide for warranty information. |
| If you received a damaged oven, you should |
|
| contact your dealer. |
|
| CAUTION: | Check with local utilities for electrical codes which |
| • This oven should be installed by a qualified | apply in your area. Local codes vary. Installation, |
| installer or service technician. | electrical connections and grounding must comply |
| • Never use the oven for warming or heating a | with applicable codes. In the absence of local codes, |
| room. Prolonged use of the oven without | the oven should be installed in accordance with |
| adequate ventilation can be hazardous. | National Electrical Code ANSI/NFPA |
Contents | Design Information |
|
| Models Available | 3 |
| Dimensions and Clearances | 3 |
| Cabinet Style Options | 4 |
| Cabinetry |
|
| Tools and Materials required | 5 |
| Framed Cabinet, Double Oven | 5 |
| Framed Cabinet, Single Oven | 6 |
| Frameless Cabinets | 7 |
| Single Oven Installed Below a Countertop | 8 |
| Cabinetry Modification Suggestions |
|
| Provide Oven Supports | 9 |
| Install Oven Supports | 9 |
| Determine Need for Filler Panels | 10 |
| Filler Panel Construction | 10 |
| Cut Rail for Filler Panel | 11 |
| Cut Appearance Panel | 11 |
| Determine Location of Cleats | 11 |
| Cut and Secure Cleats to Filler Panel | 12 |
| Secure Rail to Appearance Panel | 12 |
| Secure Assembled Filler Panel to Cabinet | 12 |
| Installation |
|
| Tools and Materials Required | 13 |
| Electrical Locations | 14 |
| Remove Oven Door | 14 |
| Route Cable Through Cutout | 14 |
| Connect Electrical | 14, 15 |
| Secure Oven to Cabinet | 15 |
| Attach Lower Trim | 16 |
| Replace the Oven Door | 16 |
2
