Ice storage bin
To remove:
Lift up the access door to reach the icemaker. Set the icemaker power switch to the O (off) position. With the access door closed, support the storage bin at the bottom while slightly lifting. Pull bin straight out.
To replace:
Slide the bin back until the tab on the bin locks into the slot on the shelf. If the bin does not go all the way back, remove it and rotate the drive mechanism 1/4 turn. Then push the bin back again.
Access Door
Ice Storage Bin
Rotate
Drive
Mechanism
Important facts about your ice
&water dispenser
•Do not add ice from trays or bags to the storage bin. It may not crush or dispense well.
•Avoid overfilling glass with ice and use of narrow or
•Beverages and foods should not be
•To keep dispensed ice from missing the glass, put the glass close to, but not touching, the dispenser opening.
•Some crushed ice may be dispensed even though you selected CUBES. This happens occasionally when a few cubes accidentally get directed to the crusher.
•After crushed ice is dispensed, some water may drip from the chute.
•Sometimes a mound of snow will form on the door in the ice chute. This condition is normal and usually occurs when you have dispensed crushed ice repeatedly. The snow will eventually evaporate.
•Dispensed water is not ice cold. For colder water, simply add crushed ice or cubes before dispensing water.
•The first glass of water dispensed may be warmer than the following ones. This is normal.
11
