Temperature Controls
Preset Settings:
Allow 24 hours to reach these preset temperatures.
Temperature controls
The temperature display shows the actual temperature of the freezer and fresh food
compartments. The actual temperature may vary slightly from the set temperature based on factors such as door opening, amount of food, defrost cycling and room temperature.
To turn off the cooling system in both the freezer and fresh food compartments, press either 
pad until both displays show OFF.
To turn the cooling system on, press either
pad. The preset temperatures of 0°F and 37°F will appear in the display.
To check the current temperature setting for the fresh food or freezer compartment,
press the 
or 
pad once. After 5 seconds, the display will return to the actual temperature.
To change the temperature settings, press the 
or 
pads. Allow 24 hours for the refrigerator to reach the temperature you have set.
Temperature Ranges
|
| Low |
| High |
|
Fresh Food |
| 34°F |
| 45°F |
|
|
| 1°C |
| 7°C |
|
Freezer |
|
| +6°F |
| |
|
|
|
| ||
|
|
|
|
|
|
Changing display temperatures from °F to °C
NOTE: Setting the controls to OFF stops cooling, but does not shut off electrical power to the refrigerator.
To change the temperature display between Fahrenheit and Celsius, press
Temp Display °C/°F.
Door alarm
To turn the Door Alarm feature on, press DOOR ALARM once. The ACTIVE light will come on. To turn it off, press it again.
On models with a dispenser, the Door Alarm feature is located on the dispenser panel on the front of the freezer door.
When the DOOR ALARM is active, the alarm will flash and beep if you keep the door open for more than 2 minutes.
8
