9.CONSOLE OPERATING MODES
OFF MODE
✦Use this mode to disarm the burglary portion of the system.
✦Switching to Off Mode stops any alarms in progress.
✦The
1.Switch to Off Mode by entering the user code, and pressing OFF.
✴When the system is disarmed to Off Mode, the Console will sound one “Gong”.
✴If an alarm has occurred, multiple Beeps will sound after disarming and the sensor indicator for the sensor(s) that caused the alarm will fl ash.
✎NOTE: In Off Mode, protected doors and windows cannot trigger the burglary alarm.
CHIME MODE
OFF MODE
START HERE
(OPTIONAL)
YOUR
USER
CODE
OFF 1 GONG
DONE
CHIME MODE
START HERE
✦Chime Mode is for monitoring entries and exits without causing alarms.
✦Use Chime Mode as an “automatic door chime” when at home.
✴Opening any protected door or window causes the Console to sound a
1A. Select the Chime Mode by entering a user code, then press CHIME.
1B. The user can enter Chime Mode from Off Mode by pressing CHIME for two seconds.
✴ When the system is switched to the Chime Mode, the |
keypad(s) will sound a “Gong” and one “Beep”. |
✦ Switching to Chime Mode disarms the system |
CHIME
(OPTIONAL)
YOUR
USER
CODE
1 GONG & 1 BEEP
and stops any alarms in progress. |
✴ If an alarm has occurred, multiple Beeps will sound after |
disarming and the sensor indicator for the sensor(s) that |
caused the alarm will fl ash. |
✎NOTE: In Chime Mode, protected doors and windows cannot trigger the burglary alarm.
DONE
START IN OFF
HOLD
CHIME DOWN
1 GONG & 1 BEEP
DONE
17