1.THE DVS-2400 SECURITY SYSTEM
|
| ||
|
| REMOTES | |
|
| REMOTES † | |
|
|
| |
|
|
| |
|
|
| REMOTE † |
|
| ||
CONSOLE |
|
| |
WIRELESS |
| ||
|
| ||
| KEYPAD | REMOTE | |
|
|
| SMOKE DETECTOR |
† NOTE: These accessories
are not listed by UL.
DOOR/WINDOW | DOOR/WINDOW | ||||
BILL TRAP † | PIR | BREAK DETECTOR † | |||
SENSOR | SENSOR | ||||
|
|
|
CONSOLE
The
The Console constantly monitors the condition of the system’s sensors, displaying which protected doors and windows are open or closed. If an alarm occurs, the Console displays which sensor(s) caused it.When a sensor has a low battery, the Console displays which sensor needs a new battery. Sensors that send hourly status transmissions keep the Console informed of their operating condition.
Up to eight different custom user codes can be used to operate the system. For security, a user code must be entered to disarm (turn off) the system. The system can be armed (turned on) by entering a user code, or with the unique “Quick Arm” feature. The
five restricted user codes and the special page alert user code can only arm and disarm the system, no programming changes are allowed. The master user code is allowed to program the Console, and a duress code can be selected for emergency disarming of the system with a duress report to the Central Station. The page alert user code can dial a pager number to inform the pager wearer when the Console is disarmed.
The Console’s memory will retain the user codes and all of the system’s programming, even during a total power loss. An optional backup battery can be installed to power the system during short power failures.
The
Each sensor can report directly to the Central Station using the digital communicator’s Point ID feature. If a sensor triggers an alarm or experiences supervisory trouble, a unique report code can be sent for immediate identifi cation of the event.
The optional Model
The Console has
The Console’s Environmental Zone is a
flow detectors, over/under temperature sensors, fl ood sensors, etc. The Environmental Zone activates the chime annunciator without sounding the siren. The Environmental Zone does not send communicator reports.
An Automation Output in the Console provides an easy way to connect external devices to the Console. The output is fully programmable to activate on a variety of conditions, such as when the system is armed, during alarms, and during exit/entry delays. The Automation Output can connect to lighting control modules, relays, noisemakers, and indicators. The Console’s and wireless keypad’s key and transmitters can control the Automation Output.
The Console can be programmed locally using its own keypad or remotely, over the telephone, using Linear’s Model
A total of 24 sensors of the types listed on the next page can be used with each
2