CHANGING A SENSORS SUPERVISION
✦When a sensor is programmed, the Console automatically recognizes it as supervised or
✦The Console expects hourly status transmissions from any sensor programmed as supervised.
✦Any sensor can be programmed as supervised or
✎NOTE: Don't program a sensor that doesn't send status transmissions as supervised.
SENSOR NUMBER
TO CHANGE
HOME PROGRAM
16 FOR
17 FOR SUPERVISED
AWAY STORE PROGRAM
CHANGING A SENSORS RESTORE REQUIREMENTS
✦When a sensor is programmed, the Console automatically recognizes it as manual or automatic restoring.
✦The Console expects restoral signals from any wireless sensor programmed as manual restore.
✦Any sensor can be programmed as manual or automatic restore.
✎NOTE: Don't program a sensor that doesn't send restoral transmissions as manual restore.
SENSOR NUMBER
TO CHANGE
HOME PROGRAM
18 FOR MANUAL RESTORE
19 FOR AUTO RESTORE
AWAY STORE PROGRAM
ENTRY DELAY TIME
✦The
STEP #25 The Entry Delay time can be adjusted from 20 to 255 seconds using this step.
❑Write the new Entry Delay time in the User's Guide.
✎NOTE: Don't make the Entry Delay too short. The user may not have enough time to disarm the system before an alarm.
PROGRAMMING STEP #25
JKL
PROGRAM
TIME IN SECONDS
STORE PROGRAM
EXIT DELAY TIME
✦The
STEP #26 The Exit Delay time can be adjusted from 20 to 255 seconds using this step.
❑Write the new Exit Delay time in the User's Guide.
AWAY
PROGRAMMING STEP #26
PROGRAM
TIME IN SECONDS
STORE PROGRAM
BURGLARY SIREN TIME
✦The
STEP #30 The burglary siren time can be adjusted from one to 30 minutes using this step.
3DEF
PROGRAMMING STEP #30
0
HOME PROGRAM
TIME IN MINUTES
AWAY STORE PROGRAM
EMERGENCY SIREN TIME
✦The
STEP #31 The emergency siren time can be adjusted from one to 30 minutes using this step.
3DEF
PROGRAMMING STEP #31
1
HOME PROGRAM
TIME IN MINUTES
AWAY STORE PROGRAM
26