Linear DVS-2400 manual General Communicator Options, Communicator Enable, Wayaudio, Voice Response

GENERAL COMMUNICATOR OPTIONS

COMMUNICATOR ENABLE

✦The factory setting for the Console disables the communicator. If the system is going to be a non-monitored, local alarm only, leave the communicator disabled.

STEP #107 If the system is going to be monitored by a Central Station, enable the communicator with this programming step.

1

0PROGRAMMING STEP #107

7PRS

HOME PROGRAM

0 FOR COMMUNICATOR OFF

1 FOR COMMUNICATOR ON

AWAY STORE PROGRAM

2-WAY AUDIO

✦When the Model VB-2 voice module is installed, the communicator can provide 2-way audio capability.

✦The audio module can be programmed for listen-only, 2-way manual operation (using a pushbutton telephone at the Central Station), and 2-way full duplex hands free operation.

✦Refer to the VB-2 installation instructions for details on operating the audio module.

✎NOTE: The Model VB-2 digital voice response module must be installed for this option to function.

7PRS

PROGRAMMING STEP #76

6MNO

HOME PROGRAM

0 FOR NO AUDIO MONITORING

1 FOR LISTEN-ONLY

2 FOR 2-WAY MANUAL

3 FOR 2-WAY FULL DUPLEX

AWAY STORE PROGRAM

✦The factory setting for the VB-2 audio module is OFF.

STEP #76 The audio module can be set for (1) listen-only, (2) 2-way manual, (3) 2-way full duplex using this step.

✎NOTE: For safety, 2-way audio will not activate if the system is disarmed with the duress code.

✎NOTE:Units programmed for two-way duplex can still be controlled manually by pressing the “1” or “3” key. In addition, the Central Station can return the unit to two-way duplex by pressing the “8” key.

VOICE RESPONSE

✦The Console can be programmed to allow the speaker to play audio produced by the VB-2 digital voice response module.

✦This selection can also be used when a remote speaker is connected to the Console.

✦The factory setting is to disable the speaker from playing voice module audio.

STEP #78 The Console can be programmed to enable voice module audio using this step.

✎NOTE:Turning voice response OFF with this programming step will only effect the audio produced by the voice module. It will not stop the Console’s speaker from sounding local sirens and tones.

✎NOTE: A Model VB-2 digital voice response module must be installed for this option to function.

7PRS

PROGRAMMING STEP #78

8TUV

HOME PROGRAM

0 FOR NO VOICE RESPONSE

1 FOR VOICE RESPONSE

AWAY STORE PROGRAM

REMOTE LOCKOUT

✦The factory setting for the communicator allows remote connection to the Console with Linear's RA-2400 Remote Access Software and a modem (unlocked).

STEP #100 The Console can be programmed to not answer incoming calls, thereby, not allowing remote access (locked) using this step.

1

0PROGRAMMING STEP #100

0

HOME PROGRAM

0 FOR UNLOCK

1 FOR LOCK

AWAY STORE PROGRAM

33