MAKING A SENSOR A 24-HOUR DOOR CHIME
✦ Sensors can be programmed to cause the Console |
to chime any time they're activated. |
✦ |
START IN TEST
alarm in any Console mode. |
✦ The sensor must have already been programmed |
into the Console (see “Adding Sensors to the |
System” for details). |
1. | Start with the Console in Test Mode. |
2. | Enter the master user code then press TEST. |
| ✴ A “Gong” and fi ve “Beeps” will sound. |
| ✴ The sensor status indicators will light for each sensor |
| programmed into the Console. |
3. | Enter the sensor number from |
| enter two digits, example: 5 = 05). |
| ✴ The sensor status indicator light will fl ash for the sensor |
| number selected. |
TEST
MASTER
USER
CODE
1 GONG &
5 BEEPS
SENSOR NUMBER FOR CHIME
4. | Press HOME, 8, then AWAY. | |
| ✴ A “Bing” tone will sound and the sensor status indicator will | |
| light steady. |
|
5. | Enter another sensor number, or exit Setup Mode | |
| by pressing the | key then press OFF for three |
| seconds. |
|
MAKING A SENSOR INTERIOR
✦ Wireless motion detectors are automatically |
programmed as interior sensors. Any other sensor |
can also be programmed as an interior sensor. |
✦ Interior sensors can only trigger an alarm when the |
HOME
8 FOR 8 TUV CHIME ZONE
AWAY 1 BING
DONE
START IN TEST
Console is in the Away Mode. |
✦ “Home Interior” sensors can trigger an alarm when |
the Console is in the Home or Away mode. |
✦ The sensor must have already been programmed |
into the Console (see “Adding Sensors to the |
System” for details). |
1. | Start with the system in Test Mode. |
2. | Enter the master user code then press TEST. |
| ✴ A “Gong” and fi ve “Beeps” will sound. |
| ✴ The sensor status indicators will light for each sensor |
| programmed into the Console. |
3. | Enter the sensor number from |
| enter two digits, example: 5 = 05). |
TEST
MASTER USER CODE
1 GONG &
5 BEEPS
SENSOR NUMBER FOR INTERIOR
| ✴ The sensor status indicator light will fl ash for the sensor | |
| number selected. |
|
4. | Press HOME, 7, then AWAY. | |
| ✴ A “Bing” tone will sound and the sensor status indicator will | |
| light steady. |
|
5. | Enter another sensor number, or exit Setup Mode | |
| by pressing the | key then press OFF for three |
| seconds. |
|
HOME
7 FOR
7 PRS INTERIOR
ZONE
AWAY 1 BING
DONE
23