Manuals / Linear / Household Appliance / Home Security System

Linear DVS-2400 manual Typical System Sensors, Door/Window Sensor, About Sensor Status Supervision

Models: DVS-2400

1 44
Download 44 pages 42.75 Kb
Page 7
Image 7
3.TYPICAL SYSTEM SENSORS

3.TYPICAL SYSTEM SENSORS

DOOR/WINDOW SENSOR

✦Sensor mounts on door or window with adjacent magnet.

✦Opening door or window moves magnet away, triggering sensor.

✦Pressing the case causes sensor to send a test signal.

✦Jumper inside for INSTANT or DELAYED alarm setting.

✦Press the case for testing, the red transmit light shows that battery is in good condition.

✦Internal lithium batteries are monitored by the Console.

✦Sends hourly status reports to the Console.

✦Up to 3 years battery life (depends on frequency of activation). (UL tested for 1 year minimum.)

✦Sensor contains internal terminals for connection to glass break detector and external switches.

WIRELESS KEYPAD

✦For controlling the system remotely without having to go to the Console.

✦Green operation light.

✦Internal 9-volt battery is monitored by the Console.

✦Keypad's beeper will buzz during transmissions when the battery is low.

✦Up to 3 years battery life (depends on frequency of activation). (UL tested for 1 year minimum.)

✦Sends hourly status reports to the Console.

✦Press DOOR/WINDOW SENSOR to activate the automation output.

✦PressingABOUT SENSOR STATUS SUPERVISIONclears the keypad.

✦PressingManual backgroundfor two seconds sounds the mode Beeps from the Console.

✔Off Mode: 1 “Gong”.

✔Chime Mode: 1 “Gong” & 1 “Beep”.

✔Home Mode: 1 “Gong” & 2 “Beeps”.

✔Away Mode: 1 “Gong” & 3 “Beeps”.

✔Test Mode: 1 “Gong” & 4 “Beeps”.

✦Emergency and fi re alarm can be triggered from the wireless keypad at any time.

✎UL NOTE: For personal emergency use only. Not for use as a UL Listed Medical Alert System.

WIRELESS

KEYPAD

ABOUT SENSOR STATUS SUPERVISION

All DXS Format sensors transmit hourly status reports. All DXT Format sensors do not transmit hourly status reports. Both sensor formats can be used with the Console.

When a sensor is programmed into the Console, the system will set the sensor as non-supervised or supervised. Sensors set as non-supervised are not expected to send hourly status reports. Sensors set as supervised are expected to send hourly status reports. If a status report is not received in 8 hours from a sensor set as supervised, the TROUBLE indicator will fl ash.

When sensors are programmed into the Console, ALL STATIONARY

SENSORS ARE SET AS SUPERVISED, ALL PORTABLE SENSORS ARE SET AS NON-SUPERVISED.

If stationary DXT Format sensors have been programmed into the Console, be sure to change their setting to non-supervised to prevent TROUBLE indications. This will not prevent low battery monitoring.

If portable DXS Format sensors have been programmed into the Console, and the installation requires supervision for specifi c portable sensor(s), change the selected portable sensors setting to supervised.

After programming the sensors, if changes are required, refer to “Changing a Sensors Supervision” on Page 26 for details on changing the way a sensor’s supervision is set.

5

Page 6 Page 8
Page 7
Image 7
Linear DVS-2400 manual Typical System Sensors, Door/Window Sensor, About Sensor Status Supervision, Wireless Keypad
Page 6 Page 8

DVS-2400 specifications

The Linear DVS-1200, DVS-2400, RA-2400, DUAL-824, and DVS-2408 are advanced digital video surveillance systems designed for a variety of security applications. These models offer state-of-the-art features, technologies, and characteristics that enhance security monitoring and recording capabilities.

The DVS-1200 is a compact and efficient digital video recorder that supports up to 12 channels of video input. It features high-resolution recording capabilities, providing clear and detailed images. With real-time playback and advanced motion detection, the DVS-1200 allows users to monitor activities effectively. Its user-friendly interface simplifies configuration and operation, making it accessible for both novice and experienced users.

Upgraded for larger installations, the DVS-2400 supports up to 24 channels. This model is equipped with H.264 video compression technology, significantly reducing storage requirements while maintaining high-quality images. The DVS-2400 also offers remote access capabilities, enabling users to view live footage or playback recorded events from anywhere using a smartphone or computer. Its built-in analytics features allow for motion detection, line crossing alerts, and more, enhancing overall security.

The RA-2400 is a remarkable model designed for robust performance in demanding environments. This recorder not only supports 24 channels but also integrates advanced RAID technology for data redundancy and enhanced storage reliability. The RA-2400 is ideal for applications where data loss is unacceptable, making it suitable for critical infrastructure and high-security locations.

The DUAL-824 model stands out with its unique dual-stream encoding feature. It allows simultaneous recording and streaming of two video resolutions, providing flexibility for different applications such as local monitoring and remote access. This model supports up to 8 channels and is equipped with advanced event triggers, ensuring significant activities do not go unnoticed.

Finally, the DVS-2408 is a versatile and high-performance system designed for larger facilities. With support for 24 channels and the ability to integrate with various IP cameras, the DVS-2408 delivers exceptional scalability. This model comes with comprehensive software for monitoring and management, allowing for multiple users and custom user permissions.

Together, these Linear video surveillance models represent a robust and reliable solution for modern security needs, featuring the latest technologies and high-quality performance to ensure safety and peace of mind in various environments.