SILENT BURGLARY ALARMS
✦The factory setting causes audible burglary alarms.
STEP #63 The Console can be programmed for silent burglary alarms using this step.
6MNO
PROGRAMMING STEP #63
3DEF
HOME PROGRAM
0 FOR AUDIBLE BURG
1 FOR SILENT BURG
AWAY STORE PROGRAM
SILENT EMERGENCY ALARMS
✦The factory setting causes audible emergency alarms.
STEP #64 The Console can be programmed for silent emergency alarms using this step.
6MNO
PROGRAMMING STEP #64
4GHI
HOME PROGRAM
0 FOR AUDIBLE EMERGENCY
1 FOR SILENT EMERGENCY
AWAY STORE PROGRAM
DISABLING QUICK ARMING
✦The factory setting allows quick arming of the Console by pressing down the mode keys for two seconds.
STEP #65 The Console can be programmed to not allow quick arming using this step. If quick arming is disabled, a user code must be entered before pressing the mode buttons.
✎NOTE: For commercial installations with retail traffic, it is recommended to disable quick arming to prevent customers from arming the system.
✎NOTE: If quick arming is disabled the Home Instant Mode is unavailable.
6MNO
PROGRAMMING STEP #65
5JKL
HOME PROGRAM
0 FOR QUICK ARMING OFF
1 FOR QUICK ARMING ON
AWAY STORE PROGRAM
AUTOMATIC RESTORAL OF BYPASSED SENSORS
✦Bypassed sensors are ignored by the Console and cannot cause an alarm.
✦The factory setting causes the Console to automatically restore (remove the bypass from) sensors that close. After it's restored, the sensor is ready to cause an alarm the next time it is opened.
STEP #66 The Console can be programmed to not automatically restore any bypassed sensor when the sensor closes using this step. Bypassed sensors will then remain bypassed until the system is disarmed.
6MNO
PROGRAMMING STEP #66
6MNO
HOME PROGRAM
0 FOR AUTO RESTORAL OFF
1 FOR AUTO RESTORAL ON
AWAY STORE PROGRAM
✎ NOTE: This setting affects all sensors.
AUTOMATIC BYPASSING OF OPEN SENSORS
✦The factory setting requires the user to manually bypass any open sensors when the system is armed.
✴If arming is attempted with open sensors, the Console will sound fi ve
✦Arming to the same mode again within fi ve seconds will bypass any open sensors and arm the Console.
STEP #67 The Console can be programmed to automatically bypass any open sensors when the system is armed using this step.
✎ NOTE: This setting affects all sensors.
6MNO
PROGRAMMING STEP #67
7PRS
HOME PROGRAM
0 FOR AUTO BYPASS OFF
1 FOR AUTO BYPASS ON
AWAY STORE PROGRAM
28
