Cleaning the condenser
Care and Cleaning
There is no need for routine condenser cleanings in normal home operating environments. However, in environments that may be particularly dusty or greasy, the condenser should be cleaned (at least annually) for efficient refrigerator operation.
To clean the condenser:
1.Turn off the power at the circuit breaker or fuse box. Wait about 30 minutes for the condenser area to cool.
2.Raise the grille panel at the top of the refrigerator.
3.Use a soft bristle brush to loosen dust and lint on the condenser fins. Use a vacuum hose to remove soil.
4.Lower the grille panel.
5.Turn the power on at the fuse box or circuit breaker.
Preparing for vacation
For long vacations or absences, remove food and shut off power to the refrigerator at the fuse box or circuit breaker. Clean the interior (see Cleaning Inside). Leave doors open.
For shorter vacations, remove perishable foods and leave controls at regular settings. However, if the room temperature is expected to drop below 60°F (16°C), follow the same instructions as for long vacations.
Set the icemaker power switch to the O (off)
position and be sure to shut off the water supply to the refrigerator.
Preparing to move
Secure all loose items such as grille, shelves | Be sure the refrigerator stays in an upright |
and drawers by taping them securely in place | position during moving. |
to prevent damage. |
|
24
