Installation Instructions
INSTALLING SABBATH MODE SWITCHBOX Side-by-Side Refrigerators
MOUNT SWITCHBOX
•FOR PERSONAL SAFETY: Unplug the refrigerator, remove house fuse or open circuit breaker before beginning installation.
•Open the grille panel.
•Place a sheet or towel over the top of the fresh food and freezer doors to prevent accidentally scratching the door panels.
•Place the switchbox against the evaporator housing to the left of the main control board cover (on 36” and 42” models) or to the right of the main control board cover (on 48” models). Make sure the green LED light on the side of the switchbox is pointing DOWN.
•Mount the switchbox to the evaporator housing using the two
IMPORTANT: DO NOT DRILL HOLES IN THE EVAPORATOR HOUSING. USE THE
If desired, the top of the switchbox can be mounted using a screw from one of the plastic wire straps at the top of the evaporator housing.
Sabbath |
Switchbox |
Mounting |
Location |
48” Models |
Sabbath Switchbox |
Mounting Location |
36” & 42” Models |
AC Connector Wire |
Screws |
Green LED Light |
DC Connector Wire |
48” Model Shown |
5