Installation Instructions
INSTALLING SABBATH MODE SWITCHBOX Bottom-Freezer Refrigerators
MOUNT SWITCHBOX
•FOR PERSONAL SAFETY: Unplug the refrigerator, remove house fuse or open circuit breaker before beginning installation.
•Open the grille panel.
•Place a sheet or towel over the top of the fresh food door to prevent accidentally scratching the door panel.
•Place the switchbox against the left side of the grille panel opening, placing the switchbox as far toward the front of the refrigerator as possible.
–Make sure to leave clearance for the door hinge (if necessary).
–Make sure the green LED light on the side of the switch box is pointing DOWN.
•Mount the switchbox using the two
IMPORTANT: DO NOT DRILL HOLES IN THE SIDE OF THE REFRIGERATOR. USE THE
Sheet or Towel
AC
Connector Wire
Screws |
|
DC |
|
Connector |
|
Wire | Green |
| |
| LED Light |
MAKING ELECTRICAL CONNECTIONS
•Locate the refrigerator’s AC Input and Output connectors to the right of the water filter.
•Disconnect the refrigerator’s AC Input and Output connectors from each other.
NOTE: If possible, try to avoid exposing the wires attached to the refrigerator’s AC connectors.
Refrigerator |
AC Connectors |
8