Gefen EXT-DPKVM-841 user manual Switching sources using RS-232, Switching sources using Telnet

OPERATING THE 8X1 DPKVM SWITCHER

Switching sources using RS-232

Configure the Switch for use with RS-232 (see page 14 for details).

Example: Switch to input 4 using RS-232

1Use the command r 4 to route the Switcher to Input 4. See page 15 for important information on RS-232 commands. RS-232 commands are case-sensitive.

2The LED indicator for Input 4 will glow bright blue on the front panel.

1 2

r 4

Route to Input 4

Switching sources using Telnet

Configure the Switch for use with Telnet. See page 24 for details.

Example: Switch to Input 2 using the Telnet protocol

1Use the command r 2 to route the Switcher to Input 2.

2The LED indicator for Input 2 will glow bright blue.

12

Type Cmd: r 2

Route to Input 2

13