9
Direct Select Buttons1 When this unit is attached to a CAT-5 port that corresponds to a display on
the 8x8 DVI Matrix, use buttons 1 through 8 to select what source that display
will be viewing. Buttons 1 through 8 directly correspond to DVI source inputs 1
through 8 on the 8x8 DVI Matrix.
IR Receiver2 This port will receive commands from an RMT-8-IR remote control for remote
controlled switching at the extended location.
Active Input LED Indicator3 1 through 8 LED indicators that will visually acknowledge which source is
currently selected.
CAT-5 Input Port4 Connect a CAT-5 cable between this port and the remote switching ports (Item 1
through 8 on page ##) for remote switching.
IR Extension Eye5 Connect the optional IR Receiver Extension (part# EXT-RMT -EXTIR) to this
port.
RS-232 Serial Control Port6 This port can be used to control switching via RS-232 serial communication.
EXT-RMT-MATRIX-848 PANEL DESCRIPTIONS