Gefen EXT-HDMI1.3-244 user manual CONNECTING AND OPERATING THE 2X4 SWITCHER FOR HDMI

Models: EXT-HDMI1.3-244

1 18

Page 9

THE 2X4 SWITCHER FOR HDMI 1.3

1.Connect up to two HDMI source devices to the 2x4 Switcher for HDMI 1.3 using the supplied HDMI cables.

2.Connect up to four HDMI capable devices to the 2x4 Switcher for HDMI 1.3 using the supplied HDMI cables.

3.Connect the included 5V DC power adapter to the 2x4 Switcher for HDMI 1.3 power input port.

4.Power on the displays ﬁrst and then the source.

Use the included IR remote control unit to switch between HDMI inputs. See page 7 for a description of the IR remote control.

Image 9

Contents

EXT-HDMI1.3-244 User Manual 2x4 Switcher for HDMITechnical Support ASKING FOR ASSISTANCETechnical Support Hours Write To1 Introduction 2 Operation Notes 3 Features 4 Panel Layout CONTENTS6 Connecting And Operating The 2x4 Switcher For HDMI 7 IR Remote Control Description 8 IR Remote InstallationThe Gefen 2x4 Switcher for HDMI INTRODUCTIONGefen How It WorksOPERATION NOTES READ THESE NOTES BEFORE INSTALLING OROPERATING THE 2X4 SWITCHER FOR HDMI Package Includes FEATURESPANEL LAYOUT Front PanelBack Panel PANEL DESCRIPTIONS How to Connect the 2x4 Switcher for HDMI CONNECTING AND OPERATING THE 2X4 SWITCHER FOR HDMIHow to Operate the 2x4 Switcher for HDMI Wiring Diagram for the Gefen 2x4 Switcher for HDMIIR REMOTE DESCRIPTION RMT-2IR Remote Control UnitExample Installing the IR Remote Control Battery IR REMOTE INSTALLATIONSetting the IR Remote Channel on the RMT-8IR IR REMOTE CONFIGURATIONSetting The IR Channel IR CHANNEL CONFIGURATIONEDID Mode Selection 1. EXTERNAL MODE EDID MANAGEMENT2. INTERNAL MODE TimingEDID MANAGEMENT The following EDID features are copied from OutputExternal EDID Management Display ConnectionsSPECIFICATIONS WARRANTY PRODUCT REGISTRATIONunder the Support section of the Gefen Web site This product uses UL listed power supplies Rev B320600 Nordhoff St., Chatsworth CA