IR REMOTE DESCRIPTION
RMT-2IR Remote Control Unit
1
2
1LED Button Press Indicator
This LED will be activated momentarily each time a button is pressed.
2Display and Source Selection Buttons
These buttons are used to select which source is routed to the displays.
Example:
Route the source connected to Input 2 to the displays connected to Output 1, Output 2, Output 3, and Output 4.
1.Press button 2 on the IR remote control unit.
The source connected to Input 2 will be routed to the displays connected to Output 1, Output 2, Output 3, and Output 4.
7
