IR Remote Installation

Installing the IR Remote Control Battery

1.Remove the battery cover on the back of the IR Remote Control unit.

2.Insert the included battery into the open battery slot. The positive (+) side of the battery should be facing up.

3.Replace the battery cover.

The Remote Control unit ships with two batteries. One battery is required for operation and the other battery is a spare.

Battery Compartment

Image 11

Contents

2x4 Switcher for Hdmi Write To Asking for AssistanceTechnical Support Technical Support Hours Contents How It Works Gefen 2x4 Switcher for HdmiIntroduction Gefen Operation Notes Features FeaturesHdmi Features Panel Layout Panel Descriptions Power LED Indicator Wiring Diagram for the Gefen 2x4 Switcher for Hdmi Connecting and Operating 2X4 Switcher for HdmiHow to Connect the 2x4 Switcher for Hdmi How to Operate the 2x4 Switcher for Hdmi IR Remote Description RMT-2IR Remote Control Unit Installing the IR Remote Control Battery IR Remote Installation Setting the IR Remote Channel on the RMT-8IR IR Remote Configuration Setting The IR Channel IR Channel Configuration Audio Format Supported Channels Edid Mode SelectionEdid Management Timing Refresh Rate Display Connections Following Edid features are copied from OutputExternal Edid Management 5V DC Specifications Product Registration Warranty Rev B3 Nordhoff St., Chatsworth CA