Gefen GTB-MHDMI1.3-144-BLK Panel Descriptions, HDMI Output Ports, Audio Channel Selection Switch

PANEL DESCRIPTIONS

1HDMI Output Ports 1-4

Connect HDMI-compliant display device(s) to any of these output ports.

2Audio Channel Selection Switch

This switch will modify the EDID to specify the number of supported audio channels when using the INTERNAL EDID mode. This setting will not affect the EDID information when using the EXTERNAL EDID mode.

3EDID Mode Selection Switch

This switch will control the location of the EDID that will be sent to the source device. The options are EXTERNAL and INTERNAL. Please see pages 7-11 for more information.

4USB Service Port

Mini-USB service port used for upgrading the firmware.

5Locking HDMI Port

Connect an HDMI source device to this port. The signal from this port will be replicated to all HDMI output ports. Please see the Features section on page 3 for supported HDMI 1.3 features.

65V DC Locking Power Receptacle

Connect the included 5V DC locking power supply between this receptacle and a power source. Only use the power supply supplied with this unit. Screw the locking power tip into the socket on the Splitter until it fits snugly.

7Power Indicator LED

This LED will become active once the included 5V DC locking power supply has been properly connected to the unit and a power source.

5