Gefen GTB-MHDMI1.3-144 user manual CONNECTING AND OPERATING THE GEFENTOOLBOX 14 SPLITTER FOR HDMI

CONNECTING AND OPERATING

THE GEFENTOOLBOX 1:4 SPLITTER FOR HDMI

How to Connect the GefenToolBox 1:4 Splitter for HDMI

1.Use the supplied HDMI cable to connect the source device to the HDMI input port of the GefenToolBox 1:4 Splitter for HDMI.

2.Use additional user-supplied HDMI cables to connect up to 4 HDMI- compliant displays to the output ports on the 1:4 Switcher for HDMI.

3.Connect the included 5V DC power supply to the power receptacle on the Splitter.

4.Connect the other end of the power supply to an available power outlet.

How to Operate the GefenToolBox 1:4 Splitter for HDMI

The GefenToolBox 1:4 Splitter for HDMI does not require any configuration to begin splitting the incoming HDMI input signal. However, depending on the features required by the user, the EDID Mode and Audio Channel Selection switches may need to be adjusted. See the following section for more information on the usage of these switches.

Wiring Diagram for the GefenToolBox 1:4 Splitter for HDMI

6