IR REMOTE CONTROL UNIT DESCRIPTION

1

2

1LED Button Press Indicator

This LED will activate momentarily upon each button press. This visual indicator is to inform the user that a command has been sent by the IR remote control.

2Display and Source Selection Buttons

These buttons will be used to send display and source selections to the GefenToolBox 4x1 Switcher for HDMI.

Routing Sources to Displays

Issuing a routing command is a simple process. There are a total of 4 buttons on the RMT-4IR. The individual buttons represent the Inputs that are available for the Output.

For example, to route the source connected to HDMI In 2 to the display, press button 2 on the RMT-4IR.

8

Page 11
Image 11
Gefen GTB-MHDMI1.3-441 user manual IR Remote Control Unit Description, Routing Sources to Displays