Gemini warranty CDT-05 PROFESSIONAL HYBRID TURNTABLE INTRODUCTION, Features, Cautions

CDT-05 PROFESSIONAL HYBRID TURNTABLE

INTRODUCTION:

Congratulations on your purchase of a Gemini CDT-05 Professional Hybrid Turntable. The CDT-05 is the latest advancement in DJ technolo- gy, combining the control of a fully functional high torque turntable with the versatility and convenience of Compact Discs. In addition, the CDT-05 has the ability to play both Vinyl records and Compact Discs simultaneous- ly, for an endless array of performance possibilities. With the proper maine- nance, the CDT-05 will provide years of reliable and solid performance.

FEATURES:

-Audio CD, CD-R, CD-RW, and MP3 compatible

-Removable, virtually unskippable straight tone arm system

-High-Torque Direct Driven platter (3.6 kg/cm) provides full control over CD playback

-Independent audio outputs for turntable and CD sections

-3-position CD/TT mode switch allows simultaneous playback of both CD and vinyl

-3 DSP effects: Filter, Echo, and Phase with variable parameters

-Reverse switch

-Motor ON/OFF switch

-3 Hot-Startable cue points with easy to operate memo button

-Master cue w/ hot-start feature

-Key Lock (Master Tempo)

-Anti-Shock Protection using RAM buffer memory

-Slot Loading mechanism with LED illumination

-Single auto-cue/continuous play modes

-Seamless looping with reloop/stutter & loop editing

-Pitch bend via platter or buttons

-Three mode time selection

-Frame accurate search & cue

-Large 4-line backlit dot matrix display

-Sturdy aluminum platter with finger grooves

-Variable Pitch control with ranges of 4%, 8% , 16%, and 50%

-Soft touch buttons with bright LEDs

CAUTIONS:

1.All operating instructions should be read before using this equipment.

2.To reduce the risk of electrical shock, do not open the unit. There are NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a qual- ified Gemini Sound Products service technician. In the USA: If you experi- ence problems with this unit, please call 1 (732) 738-9003 for Gemini Customer Service. Do not attempt to return this equipment to your dealer.

3.Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove. When operating, ensure that the unit has adequate ven- tilation.

4.This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents.

5.When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of damage during transit.

6.DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

7.DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CON- TROLS OR SWITCHES.

CDT-05 QUICK START INSTRUCTIONS:

1.Set up the unit according to the Connections/Setup and Tonearm Setup section. Make sure to first review all of the warnings and cautions before proceeding.

2.To play a CD, first insert a disc into the CD transport located on the front right hand side of the unit, and switch the OPERATION MODE SWITCH (44) to ‘CD.’ Make sure the MOTOR ON/OFF (21) button is lit, and press the PLAY/PAUSE BUTTON (16) to begin playback. You will have full access to manipulating the music via the SCRATCH CONTROL VINYL PLATE (3), in the same fashion as a turntable. You will also be able to apply digital effects to the CD portion of the unit, including cue points, DSP effects, pitch, reverse, etc. For detailed instructions on how each feature applies to CD playback, see the Functions section.

3.To play a Vinyl record, place the specialized Slipmat on top of the SCRATCH CONTROL VINYL PLATE (3), so that the mat is flush with the SCRATCH ANCHOR (4). Place a record on top of the Slipmat, and switch the OPERATION MODE SWITCH (44) to ‘TT.’ Make sure the MOTOR ON/OFF (21) button is lit, and press the PLAY/PAUSE BUTTON (16) to begin playback. This might seem unconventional at first, but you will find the performance to be flawless. While in TT Mode, any manipulation of the vinyl record (or the platter) will not be applied to the CD. In order to preserve vinyl’s unique sound qualities as much as possible, the audio from the Turntable portion is not sent through the DSP effects section.

4.In order to play both CD and Vinyl simultaneously, you must switch the

OPERATION MODE SWITCH (44) to ‘MIX.’ In Mix Mode, the SCRATCH CONTROL

VINYL PLATE (3) will not control the CD. The purpose of this is so that a DJ may play a beat off of CD, while scratching over it with a Vinyl record. Use the MOTOR ON/OFF (21) button to start and stop the platter for Vinyl play- back, and use the PLAY/PAUSE BUTTON (16) to start and stop playback of the CD portion. Note that the independent audio outputs on the back of the CDT-05 allow you to connect the CD and Vinyl portion of the unit to sep- arate channels of your audio mixer. In Mix Mode, the PITCH CONTROL (9) will control the pitch of the Turntable portion, and the PITCH BEND BUTTONS (10) will control the pitch of the CD portion. Because the unit shares many functions between CD, Turntable, and Mix, it is best to read over the Functions section to get a grasp of how each function behaves in each mode.

5.Read the rest of the manual! Everyone (even the author of this manu- al) wants to start playing right away, and that is understandable - especial- ly with such an exciting and innovative product as the CDT-05. However, the function of it does differ from conventional products, and this manual

<5>

is written to address those differences and put them into the perspective and context of a performing DJ. You might even discover functions you never knew existed! We know that you want to dive right in and get start- ed, but keep the manual at an arm’s length, just in case you get stuck or need clarification.

CONNECTIONS / SETUP:

1.POWER SWITCH: The POWER SWITCH (33) turns the unit ON or OFF OFF. Make sure the switch is in the ‘OFF’ position prior to mak- ON ing any connections.

2.AC INLET: The AC INLET (31), located on the rear of the unit, is the connector which accepts the POWER CORD (sup- plied) used to power the unit.

3. VOLTAGE SELECTOR SWITCH: The VOLTAGE SELECTOR

SWITCH (32) allows the unit to operate on either 115 or

230 volt configurations, for worldwide operation. Prior to using the unit, make sure that this switch reflects the voltage supplied in your locality.

4.CD AUDIO RCA OUTPUTS (37): This set of outputs carries the audio signal from the CD player portion of the unit and should be

connected to an appropriate line-level input on your audio mixer.

5.PHONO RCA OUTPUTS (38): This set of outputs carries the audio signal from the turntable portion of the unit and should be con-

nected to an appropriate phono-level input on your audio mixer.

6.GROUND TERMINAL: As you may notice, the CDT-05 does not have a tradi- tional ground terminal, as most turntables have. The reason for this is that the CDT-05’s turntable section is grounded internally and does not require the use of a ground wire. If you are experiencing any type of ground hum from the turntable section, verify that your CDT-05 is powered using the same outlet as your mixer and the rest of your audio equipment.

DIGI TAL 7. DIGITAL OUTPUT (36): This output carries audio from the CD
OUT	player portion of the unit in IEC-958 (S/PDIF) format, and can be

connectd to any device with the appropriate S/PDIF input, such as a digital mixer, computer, or outboard D/A converter. Using this particular output requires specialized equipment and may not apply to

your setup.

8.RELAY START JACK (35): This jack makes it possible to connect two CDT-05s together, so that when one unit finishes playing, the

RE LAY opposite unit automatically starts playback. For normal use, leave

this jack disconnected.

9. LOW PROFILE OR STANDARD FEET (45): The

feet may be changed depending on the height you wish to achieve. With the LOW PROFILE