3.SETTING A SEAMLESS LOOP:

a. During the playback of a CD, find the point at which you want to set the beginning of the SEAMLESS LOOP (LOOP IN A). If you want to set a SEAMLESS LOOP on the fly, proceed to step B. Otherwise, while in CD Mode only, you may pause the playback by pressing the PLAY/PAUSE BUTTON (16), and adjust the LOOP IN A position by using the SCRATCH CONTROL VINYL PLATE (3), then proceed to step B.

b. At the point of which you wish to set the LOOP IN A position, press the LOOP IN A (28) button. This may be done while in either Play Mode or Pause Mode.

c. At the point of which you wish to set the LOOP OUT B position, press the LOOP OUT B/EDIT (29) button. This may be done while in either Play Mode or Pause Mode.

d. Once both the LOOP IN A and LOOP OUT B position have been set, the loop will begin to play indefinitely, without any interruption. To restart the loop from the beginning, or to stutter the loop, press the RELOOP (30) but- ton.

e. To edit the LOOP OUT B point, press the LOOP OUT B/EDIT (29) button. The loop will disengage, and you will be free to replace the LOOP OUT B position, simply by pressing the LOOP OUT B/EDIT (29) button again when you have reached the at which you wish to set the LOOP OUT B position.

f. To edit the LOOP IN A point, simply press the LOOP IN A (28) button dur- ing loop playback at the time you wish to set the new LOOP IN A point. Note that you will only be able to move the LOOP IN A point to a time already within the loop that was originally set.

g. To exit the SEAMLESS LOOP and resume normal playback, press the LOOP OUT B/EDIT (29) button. If necessary, you can set a brand new SEAMLESS LOOP (return to step A), or restart the previously playing loop by pressing the RELOOP (30) button.

SPECIFICATIONS

TURNTABLE SECTION:

Type

Direct Drive Manual Turntable

Drive Method

Super High Torque (3.6 kgf/cm) Direct Drive

Motor

DC Motor

Speed

33 1/3, 45, 78 RPM

Variable Pitch

+/- 4, 8, 16, 50% Slider with Range Selection Buttons

Wow and Flutter

Less than 0.25% WRMS*

*This rating refers to the turntable and platter assembly only and excludes the effects of records, cartridges, or tonearms.

TONEARM SECTION:

 

Type

Statically Balanced Straight Tonearm

Headshell Weight

5.6 g

COMPACT DISC SECTION:

 

Quantization

1 Bit Linear/Channel, 3 Beam Laser

Oversampling Rate

8 Times

Sampling Frequency

44.1 kHz

Frequency Response

20 Hz to 20 kHz

Total Harmonic Distortion

Less Than 0.05%

Signal to Noise Ratio

86 dB

Dynamic Range

90 dB

Digital Output

IEC958 (S/PDIF)

Channel Separation

86 dB (1 KHz)

Output Level

2.0 +/- 0.2V R.M.S.

Power Supply

AC 115/230V, 60/50 Hz

Time Display

Track Elapsed, Song Remain, or Total Remain

Instant Start

Within 0.03 Seconds

Variable Pitch

+/- 4, 8, 16, 50% Slider with Range Selection Buttons

WEIGHTS AND DIMENSIONS:

Dimensions: 17.75 x 14.65 x 6.3” (450 x 372 x 160.5 mm)

Unit Weight: 20.2 lbs (9.1 kg)

Specifications and design are subject to change without notice for purpose of improvement.

*The stated warranty does not affect statutory local warranties

OPTIONAL ACCESSORIES:

DJX-05

DJX-05 Professional Monitoring Headphones

GX-450

GX-450 Powered ABS Loudspeakers

 

CS-02 Professional 5-Channel Stereo Mixer

CS-02

For more information on new and exciting Gemini products, visit our website at http://www.geminidj.com!

NOTES:

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

<8>

Page 8
Image 8
Gemini CDT-05 warranty Setting a Seamless Loop, Specifications Turntable Section, Tonearm Section, Weights and Dimensions