Generac 005735-0 General Information, Handle Assembly, Battery Connections, Positive, Cable

General Information

Figure 2 - Handle Assembly

1.2.3 BATTERY CONNECTION

•The battery shipped with the generator has been provided fully charged. Caution must be taken when connecting the battery.

NOTE:

A battery may lose some of it’s charge when not in use for prolonged periods of time.

•Cut the tie wrap cable holding the RED and BLACK battery cables to the stator.

•Connect the RED battery cable to the battery Positive terminal (+). After making sure that the connection is tight, slip the rubber boot over the terminal connection.

•Connect the BLACK battery cable to the battery Negative terminal (–). Make sure the connection is tight.

•Double check all connections to ensure they are in the correct location and secure. See Figure 3.

•Install the battery post covers (included).

Figure 3 - Battery Connections

Negative	Positive
Cable	Cable

5