Section 7 – Warranty

PRIMEPACT 50 and 70 (50Hz) Recreational Vehicle Generators

EMISSION CONTROL SYSTEM WARRANTY

Emission Control System Warranty (ECS Warranty) for 1997 and later model year engines:

(a)Applicability: This warranty shall apply to 1997 and later model year engines. The ECS Warranty Period shall begin on the date the new engine or equipment is purchased by/delivered to its original, end-use purchaser/owner and shall contin- ue for 24 consecutive months thereafter.

(b)General Emissions Warranty Coverage: Generac warrants to the original, end-use purchaser/owner of the new engine or equipment, and to each subsequent purchaser/owner, that each of its engines is ...

(1)Designed, built and equipped so as to conform with all applicable regulations adopted by the EPA and CARB pursuant to their respective authority, and

(2)Free from defects in materials and workmanship which, at any time during the ECS Warranty Period, may cause a war- ranted emissions-related part to fail to be identical in all material respects to the part as described in the engine manu- facturer’s application for certification.

(c)The ECS Warranty only pertains to emissions-related parts on your engine, as follows:

(1)Any warranted, emissions-related parts that are not scheduled for replacement as required maintenance in the Owner’s Manual shall be warranted for the ECS Warranty Period. If any such part fails during the ECS Warranty Period, it shall be repaired or replaced by Generac according to Subsection (4) below. Any such part repaired or replaced under the ECS Warranty shall be warranted for the remainder of the ECS Warranty Period.

(2)Any warranted, emissions-related part that is scheduled only for regular inspection as specified in the Owner’s Manual shall be warranted for the ECS Warranty Period. A statement in such written instructions to the effect of “repair or replace as necessary” shall not reduce the ECS Warranty Period. Any such part repaired or replaced under the ECS Warranty shall be warranted for the remainder of the ECS Warranty Period.

(3)Any warranted, emissions-related part that is scheduled for replacement as required maintenance in the Owner’s Manual shall be warranted for the period of time prior to the first scheduled replacement point for that part. If the part fails prior to the first scheduled replacement, the part shall be repaired or replaced by Generac according to Subsection

(4)below. Any such emissions-related part repaired or replaced under the ECS Warranty shall be warranted for the remainder of the ECS Warranty Period prior to the first scheduled replacement point for such emissions-related part.

(4)Repair or replacement of any warranted, emissions-related part under this ECS Warranty shall be performed at no charge to the owner at a Generac Authorized Warranty Service Facility.

(5)When the engine is inspected by a Generac Authorized Warranty Service Facility, the owner shall not be held responsi- ble for diagnostic costs if the repair is deemed warrantable.

(6)Generac shall be liable for damages to other original engine components or approved modifications proximately caused by a failure under warranty of any emission-related part covered by the ECS Warranty.

(7)Throughout the ECS Warranty Period, Generac shall maintain a supply of warranted emission-related parts sufficient to meet the expected demand for such emission-related parts.

(8)Any Generac authorized and approved emission-related replacement part may be used in the performance of any ECS Warranty maintenance or repairs and will be provided without charge to the purchaser/owner. Such use shall not reduce Generac’s ECS Warranty obligations.

(9)Unapproved, add-on, modified, counterfeit and/or ‘grey market’ parts may not be used to modify or repair a Generac engine. Such use voids this ECS Warranty and shall be sufficient grounds for disallowing an ECS Warranty claim. Generac shall not be held liable hereunder for failures of any warranted parts of a Generac engine caused by the use of such an unapproved, add-on, modified, counterfeit and/or ‘grey market’ part.

EMISSION RELATED PARTS INCLUDE THE FOLLOWING:

1) Fuel Metering System:

2)

Air Induction System including:

1.1) Gasoline carburetor assembly and its

a) Intake pipe/manifold

internal components (if so equipped).

b) Air cleaner

a) Fuel filter (if so equipped)

3)

Ignition System including:

b) Carburetor gaskets

a) Spark plug

c) Fuel pump (if so equipped)

b) Ignition module

1.2) LPG carburetion assembly and its

4) Catalytic Muffler Assembly (if so equipped) including:

internal components (if so equipped).

a) Muffler gasket

a) Fuel controller (if so equipped)

b) Exhaust manifold

b) Mixer and its gaskets (if so equipped)

5)

Crankcase Breather Assembly including:

c) Carburetor and its gaskets (if so equipped)

a) Breather connection tube

d) Primary gas regulator (if so equipped)

 

 

e) LP liquid vaporizer (if so equipped)

*Generac engine types covered by this warranty statement include the following:

1)Utility

2)Lawn and Garden Equipment

3)Recreational Vehicle (RV) Generator

4)Industrial Mobile (IM) Generator

Part 2

Generac® Power Systems, Inc. 49

Page 51
Image 51
Generac 00784-2, 09290-4 owner manual Emission Control System Warranty, Emission Related Parts Include the Following

00784-2, 09290-4 specifications

Generac is a prominent name in the power equipment industry, known for its reliable backup generators and innovative solutions. Among its impressive lineup are models like the Generac 00784-2 and the 09290-4, both designed to provide dependable performance for a variety of applications.

The Generac 00784-2 is a versatile portable inverter generator that stands out for its quiet operation and efficient power output. With a peak wattage of 3,300 watts and a running wattage of 2,600 watts, this generator is perfect for camping trips, tailgating, or as a backup power source during emergencies. One of the defining features of the 00784-2 is its TruePower Technology, which produces clean and stable power suitable for sensitive electronics such as laptops and smartphones. Additionally, its economy mode helps optimize fuel efficiency, allowing users to extend runtime while minimizing noise levels.

Weighing only 46 pounds, the 00784-2 is designed for mobility. Its compact design and integrated handle make transport and storage a breeze. The generator also features a built-in fuel gauge, enabling users to easily monitor fuel levels, and its easily accessible control panel allows for user-friendly operation.

On the other hand, the Generac 09290-4 is a powerful stationary generator aimed at providing robust backup power for homes and small businesses. With a 10,000-watt output, the 09290-4 can seamlessly power essential appliances during power outages, ensuring comfort and safety. This model features an automatic transfer switch, which detects power outages and automatically switches to generator power, providing peace of mind for users.

One of the unique aspects of the 09290-4 is its low oil level shutdown feature that protects the engine from damage, prolonging its lifespan. It is also equipped with Generac's G-Force engine, known for its durability and performance. The model is designed for easy maintenance, featuring accessible parts and a user-friendly maintenance schedule.

Both Generac models incorporate advanced safety features, such as circuit breakers and alert systems, ensuring safe operation. In summary, the Generac 00784-2 and the 09290-4 exemplify the brand's commitment to quality and innovation, offering reliable power solutions tailored to meet a variety of needs, whether for outdoor adventures or home backup.