General Dynamics LT-3600 manual AaC2xxxxx Where xxxxx = First 4 numeric data characters

Integrated L-Band Up/Dn Converter LT3600 CG-1309

4.3 COMMANDS

4.3.1 Set UP/Converter Frequency

{aaC1xxxxx} Where xxxx(x) = First 4 numeric data characters

	Range: 0950 to 1525 (MHz) for Std. Band units
	Range: 0950 to 1950 (MHz) for Extended Band units
	Where (xxxx)x = Fifth character is fractional MHz as follows
	0	= 0.0 MHz
	1	= +0.125 MHz
	2	= +0.250 MHz
	3	= +0.375 MHz
	4	= +0.500 MHz
	5	= +0.625 MHz
	6	= +0.750 MHz
	7	= +0.875 MHz
	Note: If only four charactors entered, 0 is assumed as fifth digit.
4.3.2 Set DOWN/Converter Frequency
{aaC2xxxxx} Where xxxx(x) = First 4 numeric data characters
	Range: 0950 to 1950 (MHz) for Std and Extended Band units
	Where (xxxx)x = Fifth character is fractional MHz as follows
	0	= 0.0 MHz
	1	= +0.125 MHz
	2	= +0.250 MHz
	3	= +0.375 MHz
	4	= +0.500 MHz
	5	= +0.625 MHz
	6	= +0.750 MHz
	7	= +0.875 MHz
	Note: If only four charactors entered, 0 is assumed as fifth digit.
4.3.3 Set UP/Converter Gain
{aaC3xxxx}	Where xxxx = 4 numeric data characters
	Range: +100 to +300 (+10.0 dB to +30.0 dB)
	in 0.5 dB steps
4.3.4 Set DOWN/Converter Gain
{aaC4xxxx}	Where xxxx = 4 numeric data characters
	Range: +250 to +450 (+25.0 dB to +45.0 dB)
	in 0.5 dB steps
4.3.5 Set Internal 10 MHz Ref Oscillator Offset
{aaC5xxx}	Where xxx = 3 numeric data characters
	Range: 000 to 255 (0 through 10 volts)
4.3.6 Enable SSPB
{aaC6x}	Where x = 0 to disable SSPB control
	and x = 1 to enable SSPB control

Page 21