Integrated | |
|
|
4.4 STATUS REQUESTS
4.4.1Command Status
{aaS1}
Returns:{aaS1bbbbccccddddeeeefffUL}
Where | bbbb = Up/Converter Frequency (as above) |
| cccc = Down/Converter Frequency (as above) |
| dddd = Up/Converter Gain |
| eeee = Down/Converter Gain |
| fff = Ref. Osc. Offset |
| U = 0 for |
| L = 0 for |
4.4.2Fractional Frequency Status
{aaSF}
Returns:{aaSFxy}
Where: | x = U/C Fractional Frequency (0 to 7, in 125 kHz increments) |
Where: | y = D/C Fractional Frequency (0 to 7, in 125 kHz increments) |
4.4.3Level Status
{aaS2}
Returns:{S2MLffppeett}
Where: | M = | ||
| F indicates no alarm in group | ||
| D7 | – Low = SSPB Lock Alarm | |
| D6 | – Low = SSPB Thermal Alarm | |
| D5 | – Low = SSPB Amp Alarm | |
| D4 | – Low = LNB Alarm | |
Where: | L = | ||
| F indicates no alarm in group | ||
| D3 | – Low = Ext. 10 MHz Ref. Osc. Alarm | |
| D2 | – Low = Down/Converter Synthesizer Alarm | |
| D1 | – Low = Up/Converter Synthesizer Alarm | |
| D0 | – Low = Summary Alarm | |
Where: | ff = | 2 Chars., Forward SSPB Power Detection | |
|
|
| Range: 00 or 16 to 40 (dBm) (00 = No SSPB) |
Where: | pp = | 2 Chars., | |
|
|
| Range: 25 to +5 |
Where: | rr = | 2 Chars., IF Output Level Detection | |
|
|
| Range: 25 to +5 |
Where: | tt = |
| 2 Chars., on board Temperature Monitor |
|
|
| Range: 00 to 70 (0 to 70°C) |
Page 23
